581069

NAD PP-2e Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
TROUBLESHOOTING
Always turn down the volume to a low level or turn o all equipment before checking.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
No sound. • (LED is not illuminated) Power Supply not connected
to either NAD PP 2e or mains socket.
• Plug in dedicated Power Supply.
• (LED is illuminated) Wrong input on amplier/receiver
selected.
• Select input to which NAD PP 2e is connected.
• Check to see if the MM/MC selector switch is set
correctly for your type of turntable cartridge (make
sure to turn o all equipment beforehand).
• Plugs from turntable and/or lead from NAD PP 2e to
amplier/receiver sockets not property tted.
• Check all connections (make sure to turn o all
equipment beforehand).
Sound in one channel only. • Plugs from turntable and/or lead from NAD PP 2e to
amplier/receiver sockets not property tted.
• Check all connections (make sure to turn o all
equipment beforehand).
Hum or Buzz noise. • No connection from turntable to ground. • Connect the turntable’s earth (GND) lead directly to
a ground connection or to NAD PP 2e’s thumb screw
terminal “GND” which provides the grounding.
• Earth loop present. • If connected, disconnect turntable’s earth lead from
amplier/receiver.
• Interference from nearby equipment • Move NAD PP 3i and cables further away from other
equipment.
SPECIFICATIONS
MM SPECIFICATIONS
Input impedance (R and C) 47 kohms + 200 pF
Gain at 1 kHz 34 dB
Input sensitivity (ref. 200 mV output) 2.5 mV
Signal-to-noise ratio 80 dB
(A-weighted, with cartridge connected)
67 dB
(Unweighted, with cartridge connected)
Input overload (20Hz/1kHz/20kHz) 10/102/950 mV
Total Harmonic Distortion <0.03%
RIAA response accuracy ±0.3 dB
MC SPECIFICATIONS
Input impedance (R and C) 100 ohms + 180 pF
Gain at 1 kHz 58 dB
Input sensitivity (ref. 200 mV output) 0.3 mV
Signal-to-noise ratio 78 dB
(A-weighted, with cartridge connected)
67 dB
(Unweighted, with cartridge connected)
Input overload (20Hz/1kHz/20kHz) 0.8/9/84mV
Total Harmonic Distortion <0.03% (20 Hz – 20 kHz at 3V output)
RIAA response accuracy ±0.3 dB
GENERAL SPECIFICATIONS
AC supply External 23.5V DC
Unit dimensions (W x H x D) 135 x 43 x 72 mm
5.3 x 1.7 x 2.8 inches
Specications are subject to change without notice.
For updated documentation and features, please check out www.NADelectronics.com for the latest information about PP 2e.
©2015 NAD ELECTRONICS INTERNATIONAL, A DIVISION OF LENBROOK INDUSTRIES LIMITED
All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited.
No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.
While every effort has been made to ensure the contents are accurate at the time of publication, features and specifications may be subject to change without prior notice.
PP2E_ENG_OM_V03  04/15
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD PP-2e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD PP-2e in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info