745045
9
Zoom out
Zoom in
Previous page
1/12
Next page
10 +12V TRIGGER
+12V TRIGGER OUT
The +12V TRIGGER OUT is used for controlling external equipment
equipped with a +12V trigger input.
Connect this +12V TRIGGER OUT to the other equipment’s
corresponding +12V DC input jack using a mono cable with 3.5mm
male plug.
This output will be 12V when the M50.2 is ON and 0V when it is
either OFF or in standby mode.
+12V TRIGGER IN
With this input triggered by a 12V DC supply, the M50.2 can be
switched ON remotely from Standby Mode by compatible devices such
as ampliers, preampliers, receivers, etc. If the 12V DC supply is cut o,
the M50.2 will return to standby mode.
Connect this +12V Trigger input to the remote devices
corresponding +12V DC output jack using a mono cable with
3.5mm male plug. The controlling device must be equipped with a
+12V trigger output to use this feature.
11 IR IN
This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or the IR output of another component to allow
control of the M50.2 from a remote location.
To program IR Remote commands into your M50.2 via IR IN, go
to theSettings Menu,selectPlayer, IR remote.Simply select the
function desired from theIR RemoteMenu, point an IR remote
control at the IR repeater and press the button to perform that
function. Once programmed, a check-mark will appear in the
Congure IR Trigger function list.
12 AC MAINS INPUT
The M50.2 comes supplied with two separate mains power cords.
Select the mains power cord appropriate for your region.
Before connecting the plug to the mains power source, ensure that
it is rmly connected to the M50.2’s AC Mains input socket.
Always disconnect the mains power plug from the mains power
source before disconnecting the cable from the M50.2’s AC Mains
input socket.
13 POWER
The POWER switch supplies the master AC mains power for the
M50.2.
When the POWER switch is set to ON position, the M50.2 goes to
standby mode as shown by the amber status condition of the front
panel Status indicator.
If you do not intend to use the M50.2 for long periods of time (such
as when on vacation), switch o the POWER switch.
14 FUSE HOLDER
Only qualied NAD service technicians can have access to this fuse
holder. Opening this fuse holder may cause damage thus voiding
the warranty of your M50.2.
IDENTIFICATION OF CONTROLS
REAR PANEL
9
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M50.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M50.2 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M50.2

NAD M50.2 User Manual - German - 12 pages

NAD M50.2 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info