745045
8
Zoom out
Zoom in
Previous page
1/12
Next page
1 ANALOG AUDIO INPUT
Input for line level sources such as CD player, tuner or any
compatible devices. Use a twin RCA-to-RCA lead to connect the
source devices left and right Audio Output” to this input. The source
will appear as an Analog Input in the navigation drawer of the BluOS
Controller App.
2 WIFI ANTENNA TERMINAL
Connect supplied wireless antenna to this WIFI antenna terminal.
3 DIGITAL AUDIO
COAXIAL IN, OPTICAL IN
Connect to corresponding optical or coaxial digital audio output
of sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components. The source will appear
as an Optical Input or Coaxial Input in the navigation drawer of the
BluOS Controller App.
COAXIAL OUT, OPTICAL OUT
Connect to corresponding optical or coaxial digital audio input
of compatible devices such as receivers, computer soundcards or
other digital processors.
4 HDMI OUT
Connect to compatible devices with HDMI input.
Connected display device will show similar image or information
reected in the touch panel display.
IMPORTANT NOTE
HDMI OUT does not support I2S DACs.
5 RS 232
Use an RS232 straight through serial cable (not supplied) to
interface this port to the corresponding RS232 port of another
equipment like the NAD M12, NAD M32 or any compatible NAD
models. Through this RS232 connection, the VOLUME slider in the
App can be adjusted to increase or decrease the audio output level
of the M50.2.
6 USB 1, USB 2 (Type A)
Connect USB mass storage device to any or both of these USB Type
A input terminals.
Typical USB mass storage device compatible with M50.2 include
portable ash memory devices and external hard drives (FAT32
recommended).
A notication will be shown in BluOS Controller App if a USB
device is inserted. Click on USB in the navigation drawer to browse
content.
7 LAN
LAN connection must be setup for wired connection to be established.
Set up a Wired Ethernet broadband router with broadband internet
connection. Your router or home network should have a built-in DHCP
server to consummate the connection.
Using a standard straight-through Ethernet cable (not supplied),
connect one end of the Ethernet cable to the LAN port of your
wired Ethernet broadband router and the other end to M50.2’s LAN
port.
8 SERVICE/USB
This is not for consumer use. Only authorized service personnel can
access this USB port and SERVICE button.
USB (Type B) port and SERVICE button are for servicing purposes
only.
9 BT (BLUETOOTH) ANTENNA TERMINAL
Connect supplied wireless antenna to this BT antenna terminal.
IDENTIFICATION OF CONTROLS
REAR PANEL
© NAD M50.2
IN
OUT
CAUTION:
REPLACE WITH SAME TYPE T2AL 250V FUSE
ATTENTION:
UTILISER UN FUSIBLE DE RECHANGE
DE MEME TYPE DE T2AL 250V
4 5 6 8 10
1 2 7 9 11 12 13 14
3
8
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M50.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M50.2 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M50.2

NAD M50.2 User Manual - German - 12 pages

NAD M50.2 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info