737640
11
Zoom out
Zoom in
Previous page
1/12
Next page
11
PROBLEM SOLUTION
When the barbell
is lifted out of its
cradle an extra
weight plate lifts
out and becomes
dislodged from the
remaining weight
plate stack.
TIP: Be sure to lift the barbell vertically when removing it from the cradle. If
the barbell is pulled out at an angle, it may drag against un-selected weight
plates.
The cradle end plate is too tight. Loosen the four bolts beneath the cradle at
one end. The four holes are slotted for the purpose of adjusting the cradle
length. With the cradle end loose, place the fully loaded barbell in and out of
the cradle several times. It will self-adjust to the proper setting. To test, select
50 lbs and lift the barbell out quickly and see if the rest of the plates remain
in place without “sticking”.
Check the surfaces between weight plates to make sure they are clean and
free of debris*.
The weight plates should slide together easily with little resistance. Also check
the tabs on the weight plates to ensure they are not bent or broken from
accidental misuse. If so, replace any damaged weight plates.
The weight selector
dial feels too tight
and does not turn
smoothly.
Check to ensure you have released the weight selector dial fully by pressing
the release button. If not fully released the locking mechanism could be
hindering the dial from turning.
Adjust cradle end plate as described above.
Check to see if stand is on a firm, level surface.
Shuffle the weight plates around.
The barbell rack
seems to be loose
Tighten the bolts. If bolts have cross threaded or stripped, please contact
your dealer for replacements.
MAINTENANCE & TROUBLESHOOTING GUIDE
To ensure maximum lifespan and optimal performance follow these steps:
1. Keep your MX80 system in a dry, clean climate controlled environment at room temperature.
2. Periodically clean your weight plates and the barbell with disinfectant, applied using a lint free cloth.
3. Keep dust off the system.
4. ARMOR ALL protectant will give your system a beautiful clean and shine.
5. Periodically examine your product for damage, if repairs are required refer to the MX Select website
for information on how to service your system and purchase spare parts. Only manufacturer supplied
components can be used to maintain and repair the equipment under warranty.
6. Periodically shuffle the weight plates.
7. Store and operate your MX80 system on level ground.
8. Periodically check that the bolts on the system are tight.
For full product support, manuals and warranty requests visit: www.MXSelect.com/support
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MX Select MX80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MX Select MX80 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info