726079
68
Zoom out
Zoom in
Previous page
1/72
Next page
68
Brief instructions:
.
Pull out the 2-core signal line from the mounting hole and pass this line through the round
hole located at the bottom of the wired controller.
.
Use M4×25 screws to
fix the soleplate of the wired controller on the wall.
.
Fix the signal line on the copper tabs X1 and X2. Make sure the line is tightly fixed and with
no short-circuit potential.
.
Set the panel and the bottom together by clasps.
2.4.4 How to Remove the Wired Controller
The wired controller can be easily removed as shown in Fig.28
Fig.28 Removal of the Wired Controller
2.5 Error Display
When error happens to the unit, the error code will be shown on the wired controller. When
multiple errors simultaneously happen, the error codes will circularly show up.
When error occurs, please immediately shut down the unit and contact professional personnel.
As shown in the Fig.29 means the high pressure protection.
Fig.29
Cassette Serie H3 - Super DC Inverter
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MundoClima MUCSR-H3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MundoClima MUCSR-H3 in the language / languages: English as an attachment in your email.

The manual is 7,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info