30282
55
Zoom out
Zoom in
Previous page
1/58
Next page
Instructions
Seite 55
ENGLISH
19.3. Other accessories/spar parts
19.3.1. Overview
Article Order No.
Transmitter carrying bag
76 3322
Transmitter carrying case 76 3323
Scanner 35 MHz
36 MHz
40/41 MHz
72 MHz
4 5170
4 5173
4 5171
4 5172
Transmitter tray
8 5305
Space-Box ROYALevo BASIC 8 5658
Space-Box weather protection
8 5655
Transmitter carrying belt
8 5646
Kreuzgurt
8 5640
Gurtpolster
8 5641
Switch 2-position
Stick top button/switch (Î 7.4.10.)
7 5303
19.4. Using MULTInaut IV
Models equipped with the MULTInaut IV receiver unit
can be operated with the ROYALevo.
The buttons of the ROYALevo are used to control the
MULTInaut functions. No additional switches are re-
quired. All you need are the receiver units in the model.
4 buttons are assigned to each MULTInaut channel and
control the connect lamps, servos, etc.
The effect of a key-press depends from the selected
operating mode. The following possibilities exist:
a. Loads at clamp+/-1 to +/-4
The drawing shows how to connect the loads
Drawing for Servo 5 = M.naut 1
switch loads (e.g. lamps, horns, ...)
Each key-press changes (toggles) the status of the
load. (OFF Æ ON resp. ON ÆOFF)
b. Servos at the connectors 1 to 4 (no jumpers)
If no jumpers are set on 2 resp. 4, each key-press
moves the servo from one position to the other.
(right Æ left resp. left Æ right)
c. Servos connected to 1 /3
with jumpers onconnector 2/4
The keys 1 and 2 move the servo at connector 1,
the keys ¾ the servo at connector 3.
As long as the key is pressed the servo moves into
one direction until it reaches its end-point. Releas-
ing the key stopps the servo.
The full travel is split in 32 steps and takes approx.
4 sec.. A short hit on the key initiates a step of
approx. 3°.
This is how to activate MULTInaut:
1. Assign M.naut 1 or 2 to the receiver output where
the MULTInaut module in the model is connected
to.
2. Seeing one of the 4 tatus display, press ENTER
longer than 3 sec. to activate the keys groups for
MULTInaut. The display shows:
”MULTINAUT keyboard active”
3, Press ENTER for more than 3 sec. again to quit the
MULTInaut keyboard mode.
19.5. Diagnosis lead
You can connect the transmitter to the receiver directly
using a diagnosis lead, in which case the transmitter
does not generate an RF signal. This can be very useful
for making adjustments, checking travels etc.
This is the procedure:
1. Connect the appropriate diagnosis lead to the
multi-function socket on the back of the transmit-
ter, and to the model’s receiving system
2. First switch the transmitter on (RF remains off)
3. Switch the receiving system on
Different diagnosis leads must be used according to the
receiving system in the model:
Diagnosis lead
for MULTIPLEX switch leads with charge socket # 8 5105
for the „EinStein“ # 8 5162
Keys group for
M.naut 1
Keys group for
M.naut 2
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo9 in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo9

Multiplex ROYALevo9 User Manual - German - 58 pages

Multiplex ROYALevo9 User Manual - Dutch - 110 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info