Manual Multiplex Power Peak D7 EQ-BID - 30 8129 (page 23 of 92) (English, German, French, Italian, Spanish)

628910

Zoom out

Zoom in

1/92

Operating Instructions

Power Peak

D7 EQ-BID

Order No.

8129

7. MEMORY NAME MENU

Any of the twenty available memory places can be selected in

the "MEMORY NAME" display. In this menu it is also possible to

program all the parameters for the active memory.

Use the "+" and "-" buttons to select the line you wish to program.

Once you have marked the appropriate line with the arrow, you

have to activate the parameter by pressing the "START / ENT."

button (dark background). The value to be changed can then be

altered using the "+" and "-" buttons. When the value has been

changed, press the "START / ENT." button to save the value.

When the line for entering the battery type is active, you can use

the "+" and "-" buttons to select one of the following battery types:

Nickel-Cadmium bat-

tery (NiCd), Nickel-

Metal-Hydride batte-

ry (NiMH), Lithium-

Polymer battery

(LiPo), Lead-Acid

battery (Pb), Lithium-

Ferrophosphate bat-

tery (LiFe), Lithium-

Ion battery (LiIo).

Pressing the

"START / ENT." but-

ton again activates

the line for entering

the number of cells.

Use the "+" and "-"

buttons to set the

battery voltage / cell count.

In the line for entering the capacity you can press the "+" and "-"

buttonstoadjustthebatterycapacityin100mAhincrements.

•NC / NiMH max. 60 Ah

•Lithium max. 60 Ah

•Lead-acid/Pb max. 60 Ah

When the "Charge current" line is active, the charge current can

be defined within the range 0.1 A to 20 A in 100 mA increments.

Be sure to observe the battery manufacturer's specification.

In the "Discharge current" line the discharge current can be

entered in the same way, within the range 0.1 A to 10 A, again in

increments of 100 mA.

The final discharge voltage (Discharge volt.) per cell can be

adjustedbypressingthe"+"and"-"buttonsinincrementsof0.1

V,accordingtothebatterytype.

•Nickel-Cadmiumbattery(NiCd): 0.1-1.1V/cell

•Nickel-Metal-Hydridebattery(NiMH): 0.1-1.1V/cell

•Lithium-Polymerbattery(LiPo): 3.0-3.3V/cell

•Lithium-Ferrophosphatebattery(LiFe): 2.6-2.9V/cell

•Lithium-Ionbattery(LiIo): 2.9-3.2V/cell

•Lead-Acidbattery(Pb): 1.8-2.0V/cell

Factory settings are guide values only.

Thefunction"TVCvoltage"(TerminalVoltageControl)isusedto

alter the final charge voltage for Lithium batteries. The value is

entered as a voltage per cell.

Theadjustmentrangeextendsfrom3.58-4.25Volt/cell,depen-

ding on battery type. This value is stored permanently in the

"Memory name" menu. If a BID chip or key is connected, these data

are only stored temporarily.

Important note:

SettingthecorrectvalueforTVCvoltageistheresponsibilityofthe

user, and is excluded from the guarantee.

Ifthe"TRICKLE CURRENT"lineis activated, youcan adjust the

trickle charge current for NiCd and NiMH batteries in increments

of 1 mA. For these battery types the range lies between OFF and

50 - 300 mA.

The Delta-Peak cut-off sensitivity (Peak sens.) can be set for NiCd

and NiMH batteries.

•Nickel-Cadmiumbattery(NiCd): 3-15mV/cell

•Nickel-Metal-Hydridebattery(NiMH): 3-15mV/cell

The table on the next page shows an overview of all the parameters

andadjustmentrangesfortheindividualbatterytypes.

(01) Memory name. .

LiPo7.4V2000mAh

Chg Current : 2.0 A

dChg Current : 1.0 A

dChgVolt  :3.2V/C

TVCVolt  :4.20V

(01) Memory name . . .

NiMH 6 cells 2000 mAh

Chg Current : 2.0 A

dChg Current : 1.0 A

dChgVolt :1.0V/C

Trickle : 100 mA

DeltaPeak : 4mV/C

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Power Peak D7 EQ-BID - 30 8129 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Multiplex Power Peak D7 EQ-BID - 30 8129 Manual

Product: