628910

Multiplex Power Peak D7 EQ-BID - 30 8129 Manual

22
Zoom out
Zoom in
Previous page
1/92
Next page
Operating Instructions
Power Peak
®
D7 EQ-BID
Order No.
8129
7
6. MENU STRUCTURE
STOP / ESC
(01) Memory name. .
LiPo7.4V2000mAh
Chg Current : 2.0 A
dChg Current : 1.0 A
dChgVolt :3.2V/C
TVCVolt :4.20V
The parameters for charging and discharging batteries are defined In
the "MEMORY NAME" menu. The corresponding settings are stored in
the previously selected memory (see chapter 7).
The "Data display" menu displays some items of data before and
during the charge / discharge process of a Lithium battery (see chapter
8).Thisscreendisplayalsoshowsinformationrelatingtotheequalizing
process of a Lithium battery.
Note:
Only values for LiXX batteries are displayed.
Basic global characteristics are set in the "User settings" menu (see
chapter 9).
The "Cycle data" display (chapter 10) shows the charged-in and
discharged capacity, as well as the maximum battery voltage reached
during charging, and the average battery voltage during discharging
of all completed cycles. Data for up to ten cycles can be viewed; the
cycle is selected using the "+" or "-" buttons. Recorded data can only
be viewed at the end of a cycle. To erase the data, either switch the
charger off or connect a new battery.
C: = Charge
D: = Discharge
Note:
If a BID chip of key is connected, the "Cycle data" menu is not dis-
played; instead the screen shows the "BID INFO" menu.
If a battery with the BID system is connected to OUT 1 or 2, the data
stored on the chip are displayed on-screen. The data stored on the BID
chip or key can be called up by pressing the "+" or "-" buttons.
(DataView)
Main :11.39V
Max:3.81V
Min:3.79V
3.79V3.79V3.81V
0.00V0.00V0.00V
0.00V
(user setup)
Language : English
Rest Time : 2 min
Safety Cut : OFF
Safety Time : 1 min
Capa Ct : OFF
Capa value : 100 mAh
Key Beep : ON
Cycle data
No. Capacity Voltage
1C: 0mAh 11.358V
D: 0mAh 0.000V
2C: 0mAh 11.412V
D: 0mAh 0.000V
3C: 0mAh 0.000V
D: 0mAh 0.000V
BID EDIT (01/01/2000)
LiPo7.4V2000mAh
Chg Current : 2.0 A
dChg Current : 1.0 A
dChgVolt :3.2V/C
TVCVolt :4.20V
Save to BID
STOP / ESC
STOP / ESC
STOP / ESC
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex Power Peak D7 EQ-BID - 30 8129 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Power Peak D7 EQ-BID - 30 8129 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info