BA SC9840knx Anwendungsprogramm HM, DE GB - 23265 - ED - V02
INSTRUCTION MANUAL ENGLISH - PAGE 4 / 4
Parameter Logic gate 1 / 2 / 3 / 4
Choices:
Choice
Second choice
Possible input
╚> Logic gate 1 / 2 / 3 / 4
Active
Inactive
╚> Logic function
And
Or
Exclusive or
And with feedback (onlyoverwritecommunication object I)
╚> Input value 1 / 2 / 3 / 4 [Bit]
Unused
Communication object I – IV (extern) [Bit]
Output value bit logic gate (intern)
Channel A – D (intern)
╚> Output value Bit
Active
Inactive
╚> Output value Byte
=> Value Byte on
=> Value Byte off
0 - 255
╚> Extended logic function
=> Input value 1 / 2 / 3 / 4 inverted
=> Output value inverted
No
Yes
Description logic gates
The SC98.40knx includes four logic gates with up to four logic inputs (input value 1 - 4). The inputs can be internal and external values. Internal input values correspond to channels of the time switch or an
output value of one of the other logic gates. An external input value is a communication object from the KNX bus (communication object I, II, III, IV). The output canbe 1 bit and / or a 1-byte value.Selectable
logic operations for up to 4 input values are: AND, OR, exclusive OR, AND with feedback. The following tables showexamples for 2 input values and correspondingoutput values for the different logic
operations.
Input value 1Input value 2ANDOREXCLUSIVE ORAND WITH FEEDBACK
0 0 0 0 0 0
0 1 0 1 1 0
1 0 0 1 1 0**
1 1 1 1 0 1
**additionally, “input value 1” is set to be 0.
Exemplary structure of a logic gate with activated logic gate 1
Parameter Synchronisation (Time settings)
Choices:
Choice
Second choice
Explanation
╚> Send or receive date/time
send date/time to bus
receive date/time from bus
You can choose whether you provide the time for the bus or if you synchronize
the time switch with the bus time. If you select “receive date/time from bus"
you have to configure the time switch with “summer / winter time = No" and
“DCF GMT offset = 0h” for a correct synchronization of the time switch.
╚> How to send date and time
never
on query
on query and automatic/cyclic
Possible settingsfor choice „on query and automatic/cyclic“:
every 30 seconds | every minute | every hour | every 6 hour | every 12
hours | at 00:00 am | at 00:02 am | every hour and change of DST |
every 6
hours and change of DST | every 12 hours and change of DST | at 00:00 am
and change of DST | at 00:02 am and change of DST
╚> How to send time receiver state
never
on query
on query and automatic/cyclic
By activating this function the correct reception of the radio receiver can be
monitored and the status will be sent to the bus (0 = OK, 1 = Alarm / / radio
receiver changesafter 30 minutes to 1 = Alarm).
Possible settings for choice „on query and automatic/cyclic“:
every 30 seconds | every minute | every hour | every 6 hour | every 12
hours | at 00:00 am | at 00:02 am | every hour and change of DST |
every 6
hoursand change of DST | every 12 hours and change of DST | at 00:00 am
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Muller SC 98.40 knx at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Muller SC 98.40 knx in the language / languages: English, German as an attachment in your email.
The manual is 1,05 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
