Innerhalb eines Umkreises von 1m um den KNX Licht- und Temperatursensor dürfen keine Transformatoren, Relais, Schütze oder dergleichen installiert sein.
Bei Wandmontage sollte diese frei von elektrischen Leitungen und störenden Metallkörpern sein.
Montage und Anschluss des Gerätes
Anschluss / Wandmontage
Beide Schrauben an der Unterseite des Gehäuses lösen und Grundplatte abheben.
Kabel durch die beiliegende Kabeltülle und durch die Öffnung der Grundplatte führen.
Kabel entsprechend Polarität mit dem abnehmbaren BUS-Klemmenblock verbinden.
Falls notwendig BUS-Klemme wieder aufstecken bzw. richtigen Sitz prüfen.
KNX Licht- und Temperatursensor programmieren (siehe Konfiguration)
Kabeltülle entsprechend in die Öffnung der Grundplatte montieren.
Gehäuse wieder mit der Grundplatte verschrauben.
Befestigungswinkel an der Wand verschrauben und KNX Licht- und Temperatursensor aufstecken
(siehe Bohrplan).
Konfiguration
Die Parametrierung des KNX Licht- und Temperatursensor erfolgt über die ETS-Software: Vergabe
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Muller LS 30.00 knx at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Muller LS 30.00 knx in the language / languages: English, German as an attachment in your email.
The manual is 0,28 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
