722947
8
Zoom out
Zoom in
Previous page
1/9
Next page
Alle technischen Daten und Informationen sind Änderungen ohne vorherige Ankündigung vorbehalten.
-6-
VI. FAQ
Fehler auftreten
Possible solutions
Bild mit Farbunterschied
(Weiß sieht nicht weiß aus)
Überprüfen, ob das Gerät eingeschaltet ist.
Überprüfen, ob das Netzkabel angeschlossen ist.
Anpassen der Helligkeit und Kontrast.
Möglicherweise befinden sich elektrische Geräte oder
Ausrüstungen mit elektronischen Störungen.
Die Betriebsanzeige
leuchtet (flackert), aber
der Monitor hat keine
Bilder.
Überprüfen, ob der PC eingeschaltet ist.
Überprüfen, ob die PC-Grafikkarte richtig eingesetz ist.
Überprüfen, ob das Signalkabel des Monitors richtig mit dem
PC verbunden ist.
Überprüfen Sie den Signalkabelstecker des Monitors und
stellen Sie sicher, dass jeder Stift nicht verbogen ist.
Anzeigeleuchte beobachten, indem die Feststelltaste auf der
PC-Tastatur drücken, und prüfen, ob der PC funktioniert.
Farbmangel (rot, grün
und blau)
Überprüfen Sie das Signalkabel des Monitors und
stellen Sie sicher, dass jeder Stift nicht verbogen ist.
Die RGB-Farbe anpassen oder die Farbtemperatur erneut
auswählen.
Überprüfen, ob die Plug-and-Play-Funktion des
Geräts mit dem PC kompatibel ist.
Überprüfen, ob die Grafikkarte mit der Plug-and-
Play-Funktion kompatibel ist.
Die Betriebsanzeige
leuchtet nicht
Unmögliches Plug-and-
Play
Bitte schließen Sie den Monitor an das Netzkabel an;
Kabel verwenden, um
Bildsignale zu übertragen und
den Monitor gleichzeitig mit
Strom zu versorgen. Der Monitor
schaltet sich automatisch aus,
wenn die Helligkeit oder der Ton
erhöht wird.
Schließen zuerst das USB an
das Typ-C-Kabel und dann
das Typ-C-Kabel an. Es wird
"kein Signal" angezeigt und
der Bildschirm wird schwarz.
Das USB-zu-Typ-C-Kabel herausziehen, um zum
normalen Anzeigen zurückzukehren, und dann das
Typ-C-Kabel einstecken.
Wenn DCR eingeschaltet ist, sind Helligkeit, Kontrast und
Voreinstellungsmodus nicht verfügbar. Wenn der
Voreinstellungsmodus auf einen anderen Modus als den
Standardmodus eingestellt ist, sind Helligkeit, Kontrast und
DCR nicht verfügbar.
Der Bildschirm blinkt, wenn die
Eingabetaste gedrückt wird,
nachdem der dynamische
Kontrast auf EIN eingestellt ist
und der Voreinstellungsmodus
umgeschaltet wurde (blinkt
einmal bei jedem Drücken).
verdunkelndes Bild
Flackerndes Bild oder
Bild mit Wellen
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MSI Optix MAG161V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MSI Optix MAG161V in the language / languages: German as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MSI Optix MAG161V

MSI Optix MAG161V User Manual - English, French, Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info