Manual Mpman DAB120 (page 2 of 8) (English, German, French, Italian)

493942

Zoom out

Zoom in

1/8

UK-4

UK-5

UK-6

UK-7

Note: If there is no stations found after auto scan, the radio will then enter into the Tune Select Menu, you can now

press the ▲ / ▼ buttons followed by pressing the SELECT button to select “Manual tune” or “Autoscan” for stations.

DAB auto scan

The auto scan will search for the entire DAB Band III channels. After the scan has finished, the first alphanumerically

found station will be automatically selected.

1. To activate auto scan, first press the MENU button to enter into the Tune Select Menu and then press the ▲ or

▼ button to

select “Autoscan”, finally press the SELECT button to confirm, the display will show “Scanning …”

and a progressing slide bar. (F. 3)

2. All the stations that have been found will be stored automatically, to explore the stations that have been found,

press the ▲ or ▼ buttons and when you find

a station that you would like to listen to, press the SELECT button.

DAB manual tune

1. To select manual tune, first press the MENU button to enter into the Tune Select Menu, then press the SELECT

button to select “Manual tune”. (F. 4)

2. Press the ▲ or

▼ button to move through the DAB channels, the display will show “5A to 13F” and their

associated frequencies. (F. 5)

3. When your desired frequency appears in the display, press the SELECT button to confirm. The name of the

station group (ensemble/multiplex) will be displayed.

4. To listen to the station

selected, press the SELECT button again.

FAC TO RY RESET

When you move the radio to another part of the country, your pre-tuned and stored DAB stations may no longer be

available. If this is the case then you will need to reset your radio back to its original factory settings; to perform a

factory reset, please do the following:

1. Connect the radio to AC mains (via the AC/DC adaptor), then press the STANDBY/ON button to turn the radio on.

2. Press and hold the MENU button until the display shows “Press SELECT to confirm reset”.

3. Release the MENU

button and press the SELECT button once, the display will first show “Restarting …” and

after the reset is completed, the radio will go to standby.

4. Press the STANDBY/ON button to turn the radio on again, it will then automatically enter into the DAB mode and

perform auto scan

function. After the scan has finished, the radio will select and display the first

alphanumerically found station.

Note: All of your stored DAB & FM presets will be lost once the reset has taken place.

HEADPHONE JAC K

A 3.5mm type headphone jack is located at the right side of the unit.

Connect a set of headphones (not included) to

this jack for private listening without disturbing others. The speaker is automatically disconnected when the

headphones are in use.

IMPORTANT: When using headphones always set the volume to a low level before you put the headphones on.

Then insert the headphones and

gradually increase the volume to a comfortable listening level.

SPECIFICATION

***SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.

POWER SUPPLY :

AC/DC ADAPTOR INPUT: 230V~50Hz OUTPUT: 5.5V 0.9A

DC(BATTERY) 6V 1.5V(UM3) x 4

OUTPUT POWER :

1.0 W

FREQUENCY RANGE : DAB 174 - 240 MHz

FM 87.5 - 108 MHz

UNIT DIMENSION : 205 (L) x 46.2 (W)

x 105 (H) mm

WEIGHT: 0.85kg

FM radio

1. To select FM, press the DAB/FM button, the display will show FM and

the frequency.

2. To activate auto search, press and hold the ▲ or ▼ button until it starts to scan the frequency band, the display

will show “Searching … > .” or “Searching … < .”, and it will stop automatically once a station has been found.

(F. 6)(F. 7)

3. To activate

manual search, repeatedly press the ▲ or ▼ button.

4. To select audio mode, press the SELECT button to toggle between the “Auto” or “Mono” selection.

Note: The radio will automatically switch between stereo and mono mode, but you can override this and switch this

function manually which is helpful for poor

signal reception.

STORING AND RECALLING STORED STATIO NS

In either DAB or FM mode, you can store up to 10 stations to the favourite presets; this will enable you to get direct

access to your favourite stations.

1. To store a preset, first tune to your desired station, then press

and hold the PRESET button, the display will

show “Empty preset 1”, and the preset number will flash. (F. 8)

2. Press the ▲ or ▼ button to select your desired station preset number.

3. Press the SELECT to confirm your selection, the display will show “Preset # saved” (F. 9)

4. To recall

a preset station, first press the PRESET button once, then press the ▲ or ▼ button to scroll up or

down the presets that you have stored. When the display shows your desired preset number, release the

buttons. If the preset hasn't been allocated a station, the display will show “Empty

preset #”.

DAB secondary services

On some occasions you will see a “>” symbol directly after the name of the station, this indicates that there are

secondary services available to that station. These secondary services contain extra services that relate to the

primary station. E.g. a sports station may want

to add extra commentaries. The secondary services are inserted

directly after the primary station.

DAB display modes

Every time you press the INFO button, the display will cycle through the following display modes:

Tim e and date

The time and date will be automatically updated by the broadcasted information; it is no need

to set the clock

manually. In the unlikely event that no clock information is received, the display will show “<TIME/DATE>”.

Frequency

The frequency of the present station will be displayed.

Audio bit rate

The display will show the digital audio bit rate being received.

Signal strength

The display will show a slide bar

to indicate the signal strength, the stronger the signal, the longer the bar will be from

left to right.

DLS

DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster may include in their

transmissions. The message usually includes information such as programme details …etc.

Programme type

This describes

the style of the programme that is being broadcast. If the information is not available, the display will

show “<Programme Type>”.

Ensemble/Multiplex (Group name)

The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together in a single

frequency. There are national and local multiplexes, local ones contain

stations that are specific to that area.

Note: Press and hold the INFO button for longer than 2 seconds, the software version number will be displayed.

Ensemble/Multiplex(Group name)

Time/Date

Signal strength

DLS

Audio Bit Rate

Programme Type

Frequency

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mpman DAB120 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mpman DAB120 Manual

Product: