504529
6
Zoom out
Zoom in
Previous page
1/8
Next page
R331 Rechargeable Remote Control
13. Multiple Device Power Control Setup Options
After pressing the STB key, pressing the Power key turns the Set-top on or off, AND turns on or
off the TV if it has been setup. If you want the Power key to turn on other devices at the same
time you can enable these as follows:
1. Press and hold the STB key and while holding it pressed, press the OK key for 1
second. Then release both keys. You are now in setup mode.
2. Press and release the mode key (TV, DVD or AUX) you want to enable.
3. Press and release the 1 key. The selected mode is now enabled. If no mode key is
pressed instep 2 ALL modes (TV, DVD and AUX) will be enabled.
To remove a mode from the Power key:
1. Press and hold the STB key and while holding it pressed, press the OK key for 1
second. Then release both keys. You are now in setup mode.
2. Press and release the mode key (TV, DVD or AUX) you want to disable.
3. Press and release the 0 key. The selected mode is now disabled. If no mode key is
pressed in step 2, ALL modes (TV, DVD and AUX) will be disabled.
Note you can turn individual devices on/off by pressing the desired Mode key followed by
the Power key. It is important to point your Motorola remote directly towards the devices
for this feature to operate correctly.
14. Backlight Cancellation Feature
Your Motorola Easy Find Remote Control has the ability to toggle between turning the backlights
on or off. If you wish to use this feature, follow these instructions.
1. Press and hold the TV key and while holding it pressed, press the OK key for one
second and release both keys at the same time.
2. All the mode keys flash and the TV mode key light stays on.
3. Press the GUIDE key, all backlights will no longer turn on. To reverse this process so
that the backlights turn on when the remote control is being used, simply follow the same
steps of the above section one more time
15. Resetting the Remote Control to the Factory Default Settings
1. Press and hold the TV key and while holding it pressed, press the OK key for one
second and release both keys at the same time.
2. All the mode keys will flash, the TV mode key light will stay on.
3. Press and hold the DELETE key for 3 seconds until the TV mode key blinks and stays
off. The remote control is now reset to factory default settings. If you want to use the
remote control for your TV and other devices, you will need to setup the TV, DVD and
AUX mode keys.
4. If no key is pressed within 30 seconds, the remote control times out. The selected mode
key light flashes for 3 seconds and turns off. The remote control returns to normal
operation and you will need to start over.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola R331 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola R331 in the language / languages: English as an attachment in your email.

The manual is 0,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info