729402
6
Zoom out
Zoom in
Previous page
1/7
Next page
6
o Hold this button during boot time longer, until LED turns off, then release it to make the
RouterBOARD look for Netinstall servers.
RouterBOOT
The RouterBOOT firmware (also referred as Bootloader here) provides the basic functionality to boot an
Operating System. It supports serial console via the onboard serial port at the boot time. The loader supports
booting from the onboard NAND device and from a network server (see the respective section for details on
this protocol).
Boot Loader Configuration
This device doesn’t come fitted with a serial port connector, so all Bootloader specific settings must be done in
RouterOS. See „RouterOS functions
Boot Loader Upgrading
The boot loader is needed to initialize all the hardware and boot the system up.
The boot loader upgrading is possible from MikroTik RouterOS, from within the “/system routerboard” menu.
Updates are included with each RouterOS update. The procedure is described in the MikroTik RouterOS
manual:
http://wiki.mikrotik.com/wiki/Manual:Bootloader_upgrade
RouterOS functions
The default OS of RouterBOARD devices is RouterOS, when the routerboard.npk package is installed, RouterOS
can configure some RouterBOARD hardware settings
Firmware information
This menu displays RouterBOARD model number, serial number, the current boot loader version and the
version available in the current software packages installed.
[admin@MikroTik] > system routerboard print
routerboard: yes
model: "rb750"
serial-number: "154201C1DD3C"
current-firmware: "2.26"
upgrade-firmware: "2.27"
[admin@MikroTik] >
The firmware version can be upgraded from RouterOS by using/system routerboard upgrade command.
Firmware Settings
Boot loader settings are also accessible through this menu.
[admin@MikroTik] > system routerboard settings print
boot-delay: 2s
boot-device: nand-if-fail-then-ethernet
boot-protocol: bootp
enable-jumper-reset: yes
[admin@MikroTik] >
Boot-device: use this to enable Netinstall
Boot protocol: for Netinstall use Bootp, for installing other operating systems, you need to use DHCP
Enable-jumper-reset: Disable this to avoid accidental setting reset via the onboard jumper
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mikrotik RB750R2 - hEX lite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mikrotik RB750R2 - hEX lite in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info