715858
18
Zoom out
Zoom in
Previous page
1/20
Next page
Prodomus
18
may be expected when the blanket is placed to a body before switching it on. Do not place the switch
under a cover. Pre-heating time takes about 10-30 minutes when covered. You can use the warming
pad on both sides.
The heating blanket has an overheating protection and will switch off when failure occurs. If the
protective device is ruptured, appliance must be returned to the manufacturer or his agent to repair.
The appliance may only be used with 220~240 Volts a.c.
INITIAL OPERATION
Place the blanket flat ensuring that it does not overhang anywhere. Avoid that the blanket can get
folded or crumpled. The blanket may only be switched on when it is flat and unfurled. It is
recommended to preheatit for about 10 - 30 minutes.
Once the electric blanket has been installed correctly in position, connect the controller supply plug to
a suitable power outlet. Ensure the controller is set to Off. Switch the power on. Select the desired
heat setting on the controller. The indicator lamp on the switch indicates that the blanket is ON.
Only operate the blanket with the supplied switching unit model.
CAUTION: The electronic components inside the switch may lead to a slight warming of the
switch when the product is on. Therefore the switch must not be covered or placed on top of
the warming pad when it is in operation.
USING THE ELECTRIC HEAT BLANKET
Switch on the appliance using the hand-operated switch.
When using level 3-6 the heating blanket will get warm faster. When using the warming pad for
several hours it is recommended to use level 1-2.
Warning: Do not sleep with the controller set to any level Use high setting only to pre-heat the bed,
after pre-heating reduce the heat setting to a lower or middle level. Set to 0 = OFF when heat is no
longer required.
Warning: Remember to switch the blanket off at the end of use, do not leave it switched on
indefinitely.
Warning: It is recommended that this blanket is used with a residual current safety device (safety
switch) with a rated residual operating current not exceeding 30 mA.
Qualified persons using original replacement parts may only undertake repairs to the electric
warming pad. Repairs carried out by unqualified persons may cause substantial risk to the user.
CLEANING AND MAINTAINANCE
Unplug the appliance from the outlet after each use and before each cleaning.
Never submerge the control unit in any liquid. Keep away from all solvents and harsh
detergents.
Caution! Never dry clean, wring-out, tumble-dry, mangle or iron the warming pad!
Caution! Never switch the appliance on when it is wet in order to dry it!
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mia HK1064 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mia HK1064 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info