776245

Metrel MI 3394 - CE MultiTesterXA Manual

131
Zoom out
Zoom in
Previous page
1/133
Next page
MI 3394 CE MultiTesterXA Appendix D
130
Lamps HV mode
Drives external lamps through OUT_1 and OUT_2 outputs. Works only in HV & HV
programmable functions.
Red lamp (OUT_1) ON means that the instrument is ready for HV test. Red lamp turns
on before first flow command in step that contains HV test. Red lamp turns off after end
of the HV test.
Green lamp (OUT_2) blinking means that high voltage will be applied to
WITHSTANDING (HV(~+) and HV(~-)) test terminals as soon as all input conditions will
be fulfilled.
Green lamp (OUT_2) ON means that dangerous voltage is present at WITHSTANDING
(HV(~+) and HV(~-)) test terminals. Green lamp turns on before the measurement and
turns off after the measurement.
While Lamps HV mode command is enabled the settings of Drive output command for OUT_1
and OUT_2 is ignored.
Parameters
State
On – enables Lamps HV mode
Off – disables Lamps HV mode
Lamps Pass / Fail mode
Drives external lamps through OUT_3 and OUT_4 outputs.
During measurement the lights reflect status icon in single test.
After measurement
Blue lamp (OUT_3) lights ON when test has passed. Lamp is lit until next step is started.
Yellow lamp (OUT_4) lights ON when test has failed. Lamp is lit until next step is started.
Lights turn off at the beginning of next step.
While Lamps Pass / Fail mode command is enabled the settings of Drive output command for
OUT_3 and OUT_4 is ignored.
Parameters
State
On – enables Lamps Pass / Fail mode
Off – disables Lamps Pass / Fail mode
Buzzer mode
Passed or failed measurement is indicated with beeps.
Pass – double beep after the test
Fail – long beep after the test
Beep happens right after single test measurement.
Parameters
State
On – enables Buzzer mode
Off – disables Buzzer mode
External TEST / OK key mode
Instrument enables external TEST / OK key (OK / ENTER / TEST / HV TEST) by activating
INPUT pin 5 reading condition. Functionality of the EXTERNAL OK KEY mode is the same as of
the OK / ENTER / TEST / HV TEST key.
Parameters
State
On – enables External TEST / OK key mode (INPUT pin 5 is active)
Off – disables External TEST / OK key mode
… 131


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrel MI 3394 - CE MultiTesterXA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrel MI 3394 - CE MultiTesterXA in the language / languages: English as an attachment in your email.

The manual is 4.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metrel MI 3394 - CE MultiTesterXA

Metrel MI 3394 - CE MultiTesterXA User Manual - German - 110 pages

Metrel MI 3394 - CE MultiTesterXA Additional guide - Dutch - 1 pages

Metrel MI 3394 - CE MultiTesterXA User Manual - Dutch - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info