572221
24
Zoom out
Zoom in
Previous page
1/24
Next page
CS 2099 Eurocheck Technical specifications
24
Voltage and frequency
Reference value Accuracy
50.0 V @ 240 V a.c.
47.9 V @ 230 V a.c.
± (5 % + accuracy of mains
voltage)
Short-circuit current: <6 mA.
Nominal output resistance: 25 kΩ.
Specified accuracy is valid only if Eurocheck output is enabled.
Fault loop impedance, trip-lock impedance, line impedance
Reference value ()*
Accuracy
1.2 (LOOP+1 ) ±0.2
11.0 (LOOP+11 ) ±0.5
* This value is added to the actual loop/line impedance. Mains voltage fluctuations affect
accuracy of the reference.
Loading at 240 V a.c.: max. 3 minutes, 25 % duty ratio.
RCD trip-out time simulation and IΔn current measurement
IΔn reference value Accuracy
30 mA
±1 %
Trip-out time reference value Accuracy
50 ms
±2 ms
CURRENT LO indication Accuracy
28 mA
±1 mA
CURRENT HI indication Accuracy
35 mA
±1 mA
Automatic reset after 3 seconds.
Automatic mains polarity verification
Test is performed in 2 seconds after connection of Eurocheck to mains socket.
Note about reference values
Instead of relying on accuracy specifications given in this chapter, it is possible to use
calibrated reference values noted in Eurocheck Production validation certificate. They
express lower uncertainty, thus enabling better evaluation of tested instrument.
Note about EN and IEC standards
Text of this manual contains references to European standards. All standards of EN
6xxxx (e.g. EN 61010) series are equivalent to IEC standards with the same number
(e.g. IEC 61010) and differ only in amended parts required by European harmonization
procedure.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrel Eurocheck CS 2099 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrel Eurocheck CS 2099 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info