494944
7
Zoom out
Zoom in
Previous page
1/9
Next page
Help! 7
519 User Guide
Help!
Yellow power light not lit
Check the following:
1. There is AC power connected to the socket on the rear of the 519.
2. The power switch on the rear panel of the 519 is turned on.
If the yellow light will still not illuminate, check any fuses in your power
supply and the fuse in the inlet of the 519. If these are all intact, contact
your dealer.
Red lock light not lit
Check the following:
1. The Laser Disc RF output is connected to the RF input of the
demodulator
2. The Laser Disc is playing.
3. The Laser Disc is AC-3 encoded.
If the Laser Disc player in use does not produce a 5V DC signal, this will
prevent the 519 from decoding AC-3. To overcome this fit jumper 1.
No audio from AC-3 Decoder
Check the following:
1. The yellow and red lights are lit on the 519 (see above).
2. The audio system is able to replay non AC-3 sources (e.g. CD).
3. The 519 digital audio output (either cable or optical) is connected to
the AC-3 decoder.
4. The correct physical input of the AC-3 decoder is selected.
No audio when playing a Laser Disc which is not AC-
3 encoded
Check the following:
1. The yellow light is lit on the 519.
2. The audio system is able to replay non AC-3 sources (e.g. CD).
3. The 519 digital audio input (either cable or optical) is connected to the
Laser Disc player.
4. The 519 digital audio output (either cable or optical) is connected to
the AC-3 decoder.
5. The correct physical input of the AC-3 decoder is selected.
6. Jumper 2 is not fitted.
If the Laser Disc player in use does not produce a 5V DC signal, this will
prevent the 519 from selecting its digital audio inputs. To overcome this
fit a jumper in position 1.
Audible clicks or thumps when pressing play, stop or
pause on the Laser Disc
If you are using a Meridian AC-3 decoder or Meridian Digital speakers, the
500 Comms system will help to reduce any clicks. Check that the Comms
lead is in place.
If you are not using a Meridian 565 decoder, there may be some clicks as
the 519 switches to and from its digital audio inputs. If the digital audio
inputs are not in use, fit Jumper 2 to reduce the clicks.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 519 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 519 in the language / languages: English as an attachment in your email.

The manual is 0,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info