494944
6
Zoom out
Zoom in
Previous page
1/9
Next page
Jumper Options 6
519 User Guide
Jumper Options
The 519 may be fitted with up to five internal jumpers which will change
the way it operates. IN ALMOST ALL INSTALLATIONS NONE OF
THESE JUMPERS WILL BE NEEDED. The unit is supplied with no
jumpers fitted. It is recommended that the jumpers are fitted only by your
dealer.
Opening the Case
WARNING: BEFORE OPENING THE CASE DISCONNECT THE 519
FROM THE AC SUPPLY. BEFORE RECONNECTING THE SUPPLY
ENSURE THAT THE CASE IS FULLY REASSEMBLED.
To open the case remove the four screws at the corners of the rear of the
519 and the four screws at the corners of the base of the 519.
Locating the Jumper Positions
There are five sets of two pins each which may be fitted with jumpers.
Jumper number 1 is located on the left of the 519 when viewed from the
front.
Jumper 1
The Laser Disc RF output signal normally provides an 5 Volt DC signal to
indicate that the Disc is playing. When jumper 1 is not fitted the Laser
Disc 5 Volt signal is used by the 519 to enable AC-3 demodulation or
switching to regular digital audio If your Laser Disc player does not give
the 5 Volt signal fit jumper 1.
Jumper 2
In normal use the 519 will switch to regular digital audio if it is unable to
demodulate AC-3. This allows both AC-3 encoded and non AC-3
encoded discs to be replayed with no change of settings by the user.
However, fitting jumper 2 tells the 519 not to switch to regular digital
audio. In this case, if AC-3 cannot be decoded, the 519 will produce a
silent digital audio output at 48kHz sampling rate.
Jumpers 3-5
These jumpers allow the system address for the Meridian 500 Series
Comms to be changed:
System Address
Jumper 3
Jumper 4
Jumper 5
1
2
3
4
5
6
7
8
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 519 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 519 in the language / languages: English as an attachment in your email.

The manual is 0,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info