661095
13
Zoom out
Zoom in
Previous page
1/14
Next page
DIODE TEST
1) Connect the red test lead to "V/" jack and the black test
lead to the "COM" jack (The polarity of the red test lead is
positive “+”)
2) Set the Function / Range switch to "
" range.
3) Connect the red test lead to the anode of the diode to be
tested and the black test lead to cathode of the diode. The
approximate forward voltage drop will be displayed on the
LCD. If the connection is reversed, only figure "1" will be
shown.
AUDIBLE CONTINUITY TEST
1) Connect the red test lead to "V/" and the black test lead to
the "COM" jack.
2) Set the Function / Range switch to “
“ range.
3) Connect the test leads to two terminals of the circuit to be
tested. If the resistance is less than about 30, the built-in
buzzer will sound.
TRANSISTOR TEST
1) Set the Function / Range switch to "hFE" range.
2) Determine whether the transistor to be tested is NPN or
PNP, and locate the E, B, C leads. Insert the leads into the
proper holes of the hFE socket on the front panel.
3) Read the approximate hFE value at the test condition of
base current 10µA and Vce 2.8V.
FREQUENCY MEASUREMENT (For 600.219 only)
1) Set the Function / Range switch to the “KHz” range.
2) Connect the black test lead to the “COM” jack and the red
test lead to the “V/” jack.
3) Connect the test leads to the source or load to be
measured.
4) Read the frequency value displayed on the LCD.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mercury 600.219 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mercury 600.219 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mercury 600.219

Mercury 600.219 User Manual - German, Dutch, French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info