661095
12
Zoom out
Zoom in
Previous page
1/14
Next page
DC CURRENT MEASUREMENT
1) [600.219]
Connect the black test lead to the "COM" jack and the red
test lead to the "mA" jack (While the current to be measured
is between 200MA and 20A, remove the red test lead to the
“20A” jack.)
[600.524]
Connect the black test lead to the "COM" jack and the red
test lead to the "2A" jack (While the current to be measured
is between 2A and 20A, remove the red test lead to the
“20A” jack.)
2) Set the Function / Range switch to the desired “
range. If
the current to be measured is not known beforehand, set the
switch to the highest range and then turn down range by
range until satisfactory resolution is obtained.
3) Open the circuit in which the current is to be measured, and
connect the test leads in series with the circuit.
4) Read the current value displayed on the LCD.
RESISTANCE MEASUREMENT
1) Connect the red test lead to the "V/" jack and the black
test lead to the "COM" jack.
2) Set the Function / Range switch to the desired range.
3) Connect the test leads to the resistor to be measured and
read the value displayed on the LCD.
Note:
For resistance about 1M and above, the meter may twake
a few seconds to stabilize. This is normal for high resistance
readings.
CAPACITANCE MEASUREMENT
1) Set the Function / Range switch to the desired Cx range.
2) Before inserting the capacitor to be measured into the
capacitance measuring socket, be sure that the capacitor
has been fully discharged.
3) Insert the capacitor to be measured into the capacitance
measuring socket.
4) Read the capacitance value displayed on the LCD.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mercury 600.219 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mercury 600.219 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mercury 600.219

Mercury 600.219 User Manual - German, Dutch, French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info