494802
4
Zoom out
Zoom in
Previous page
1/5
Next page
1. Simultaneously hold down the VOL+ and VOL- buttons (if you
want to nd the codes of analogue or digital TVs), or P+ and
P- (to nd the decoder code).
2. When the indicator light starts ashing, release the buttons
and brie y press the 1-/-- button.
3. After a pause of several seconds, the indicator light produces
four sets of ashes, spaced out, corresponding to the code
to be obtained. Count the number of ashes. Each set of
ashes corresponds to one gure in the code. Ten ashes
correspond to the gure 0. For example, for the code 1306
the following ashes will be obtained:
P
TV Code Decoder Code
Code obtained = 1306
Make a note of the code obtained on the label on the inside of the battery cover. You may need it in future.
If you set up the remote control using the MANUAL SEARCH procedure, obtain and make a note of the code
in use as follows:
DISPLAY CODE IN USE
NOTE: During the search the indicator stops ashing and the remote control exits the programming
mode in the following cases:
• if for 12 seconds the button indicated is not pressed or if another button is pressed.
• if the list of codes to nd is terminated. If this happens, go to the www.meliconi.com website.
C. MANUAL SEARCH (DIGITAL/ANALOGUE TV)
Check that the other buttons correspond to the functions of the original remote control; if not, it is likely
that the code found is incorrect, but is used for a very similar device, therefore repeat the procedure from point 2.
P
1. Switch on the TV and select a programme.
2. Simultaneously hold down the VOL + and P+ buttons.
3. When the indicator light starts ashing, release the buttons
and brie y press the TV ON/OFF button.
4. The indicator light ashes faster; the remote control is ready
for the search.
5. Point the remote control at the TV. Slowly press and release
the TV ON/OFF button several times, stopping when the TV
is switched off (you may need to press the button several
dozen times).
6. When the TV has switched off press the OK button. Three
long ashes indicate that the operation was completed
correctly.
TV
TV
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi Gumbody Senior2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi Gumbody Senior2 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info