494802

Meliconi Gumbody Senior2 Manual

2
Zoom out
Zoom in
Previous page
1/5
Next page
The SENIOR 2 remote control is a universal remote, its memory containing data relating to many devices of
different brands available on the market. Each original device has a specifi c code which must be used to set up
the remote control.
Therefore, to use SENIOR 2 you must enter the specifi c code for each device you want to control.
If you have an internet connection, follow the online guide on the www.meliconi.com/guida website to fi nd
the specifi c codes for the devices you want to control; then set the codes in the SENIOR 2 remote control as
described in the ENTERING THE CODE DIRECTLY procedure.
FINDING THE CODE
INSERTING THE BATTERIES
If you are unable to fi nd a specifi c code, consult the section on MANUAL CODE SEARCH.
If you want to use the SENIOR 2 to simultaneously control two different devices (TV + DECODER) follow
procedure A then procedure B.
To control a single device (DECODER), follow only procedure B.
To control a single device (DIGITAL/ANALOGUE TV), follow procedure C.
If the manual search for the code is successful, obtain the code in use by following the DISPLAY CODE IN USE
procedure and make a note of it inside the battery cover.
(only to be performed if the specifi c code could not be found)
MANUAL CODE SEARCH
To go to the programming mode, according to requirements, use one of the following pairs of buttons:
VOL
+
and VOL - to set the code for the TV part only - (light blue buttons)
P
+
and P - to set the code for the DECODER part only - (dark blue buttons)
VOL
+
and P
+
to set a single code and control only one device - (whole keypad)
ENTERING THE CODE DIRECTLY
Three long fl ashes indicate a correct setting. If they do not appear, repeat the procedure.
1. Switch to the programming mode by simultaneously holding
down the appropriate pair of buttons.
2. When the indicator light starts fl ashing, release the buttons
and immediately enter the specifi c code previously found.
(e.g.: 1306)
Example of TV code
The remote control requires 2 new 1.5V alkaline AAA/
LR03 batteries.
Insert them as illustrated.
Try pressing a number button and check that the red
light remains lit continuously until you release the
button: if the light fl ashes, the batteries inserted are not
charged and are about to go fl at, therefore you must
substitute them.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi Gumbody Senior2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi Gumbody Senior2 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info