551340
19
Zoom out
Zoom in
Previous page
1/21
Next page
ENGLISH ENGLISH
16
17
Supported ResolutionTroubleshooting
Problem Solution
The device power
indicator LED doesn‘t
light up.
Check if the power plugs of TRANSMITTER/RECEIVER
are properly inserted into a functioning power outlet.
No video is
displayed on
your TV screen.
Verify that the proper cables have been selected and installed between the
Transmitter input and your High-Definition device output.
On your TV side (connected to the RECEIVER), select the HDMI as input source.
Verify the POWER LED and SOURCE LED indicator of device.
Power LED Flashing in Blue
OSD displayed:
- Ensure the transmission range between the transmitter and the receiver is
NOT over 66 feet (LOS-line of sight) transmission distance.
- Try to move the transmitter closer to the receiver.
POWER LED in Solid Blue + Slow and Flashing SOURCE LED
OSD displayed:
- Ensure your video resolution and frame rate is recognized/ supported and
within the transmission range.
- Connect the source device to your TV to check and modify the video format
compatibility.
- Check if your video resolution with HDMI input from your device is set
among 1080p, 1080i, 720p, 576p, or 480p. Please refer Chapter 5 for the detail
supported Resolution.
POWER LED in Solid Blue STATUS LED Flash Quickly
OSD displayed:
- Ensure the proper cables are connected between the transmitter and your AV
source devices.
- Ensure your source devices connected to the device transmitter are
powered on.
- Ensure the proper cables are connected between the receiver and your 2nd
HDTV near the receiver.
Poor picture
quality or
intermittent video.
Check if your video resolution with HDMI input from your device is either
1080p, 1080i, 720p, 576p, or 480p. Please refer to the “Supported Resolution
chapter where the video frame rate from your HD AV device device can sup-
port is defined.
Ensure the transmission distance is less than 66 feet (LOS).
No audio.
Check your TVs volume is properly set and not set in „MUTE“ mode.
Check if your source player’s audio volume has been turned up..
Ensure the bit rate of audio from the source device can be supported by
device. Please refer to the details in Chapter 6, Audio Bit Rate Support.
IR Blaster can’t control
Source device
Check where is IR sensor of Source device. Make sure IR Blaster sensor is close
and straight to Source devices IR sensor. Please refer Chapter 3, step 3 for
reference setup.
Change IR Blaster frequency to meet Source devices requirement. See the
page 20 for the IR blaster frequency switch.
Video Format Timings Resolution Support
Primary CEA Video Timing
640x480p @ 59.94 / 60Hz
480p
YES
720x480p @ 59.94Hz YES
720x480p @ 60Hz YES
720x576p @ 50Hz 576p YES
1280x720p @ 50Hz
720p
YES
1280x720p @ 59.94 / 60Hz YES
1920x1080i @ 50Hz
1080i
YES
1920x1080i @ 59.94 / 60Hz YES
1920x1080p @ 50Hz
1080p / 60
YES
1920x1080p @ 59.94 / 60Hz YES
Secondary CEA Video Timing
1920x1080p @ 23.98 / 24Hz
1080p / 24
YES
1920x1080p @ 25Hz YES
1920x1080p @ 29.97 / 30Hz YES
VESA Timing (DVI only)
640x480 @ 59.94 / 72.809Hz VGA YES
800x600 @ 60.317 / 72.188Hz SVGA YES
1024x768 @ 60 / 70.069Hz XGA YES
1280x768 @ 60 Hz WXGA YES
1280x1024 @ 60 Hz SXGA YES
1600x1200 @ 60Hz UXGA YES
If the SOURCE LED continues to blink in blue (slower than no signal” mode); OSD dis-
play: , and there is no video displayed or the video quality suffers, it indicates that the
video frame rate from your A/V source device is not supported. Ensure that the consu-
mer timing of your HD device is compliant with the standard listed below:
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat Wireless HD Sender Comfort at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat Wireless HD Sender Comfort in the language / languages: English, German as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info