168729
6
Zoom out
Zoom in
Previous page
1/88
Next page
6
AMPLIFIER APPLICATIONS
PAB 2100 2-Channel Amplifi er
MBQR-1
Full range
s
tereo
This is the most basic application for the Premium Series 2 channel
amplifi ers.
1. Interconnect cable checklist:
Connect the LINE INPUTS to the Radio/CD with good quality RCA
cables.
2. Crossover Switch:
The X-OVER switch must be in the FULL position.
3. Crossover frequency control checklist:
N/A for full range operation.
4. Line Level:
Refer to the section “Setting up systems after installation for
best performance”
5. Bass Remote Module:
Plug in the Bass Remote Module to the amplifi er “REMOTE” jack.
NOTE:
Minimum fi nal loudspeaker impedances:
4 & 2 Ohms stereo mode or 4-Ohms mono mode
This amplifi er will not do 1 Ohm stereo or 2/1 Ohm mono
operation.
MBQR-1
Full range
m
ono
This application illustrates the basic mono bridging method for all
MB QUART amplifi ers.
Interconnect cable checklist:
A MONO signal source is required, such as would be available from
the mono sub bass output of an active crossover, whether stand alo-
ne, or built into a head unit or equalizer. Important: Do not be temp-
ted to connect the hot, or positive outputs, from any source together
to obtain a mono signal, as this could very well damage the output
stage of that source.
It is necessary to feed the SAME signal to both left and right inputs
via a Y-adapter RCA cable. Connect the mono speaker positive termi-
nal to the LEFT +, and its negative terminal to RIGHT -.
Switch setting checklist:
The AMPLIFIER X-OVER switch must be in the FULL position.
Crossover frequency control setting checklist:
N/A for full range operation.
TIP:
If you are using the mono sub bass output of an active crossover,
there is nothing wrong with switching in the low pass fi lter in these
amplifi ers for a steeper low pass rolloff.
Minimum fi nal loudspeaker impedance:
4 ohm mono
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MB Quart pab 4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MB Quart pab 4100 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 11,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info