806939

Mascott MOL-HA-IHWD01-B - Hot water dispencer Manual

3
Zoom out
Zoom in
Previous page
1/32
Next page
3EN
or humidity.
• Do not expose the device to direct sunlight,
heat sources, excessive humidity or
corrosive environments.
• Do not place the device under any
mechanical stress.
• Improper use of the device could damage
the product.
• Please handle the device carefully. Impacts
or falls, even from a low height, can damage
the device.
• Do not open the casing as this may result in
electric shock.
• Do not attempt to disassemble or repair the
device or modify it in any manner.
• The device must be serviced if it has been
damaged in any way, i.e. the power supply cord/
plug is damaged; objects have fallen into it; it
has been exposed to rain or moisture; it has been
dropped or does not operate properly.
• Do not use abrasive cleaning solvents to clean
the device.
• Do not use foreign objects to clean the device.
IMPORTANT INFORMATION,
FOLLOW THESE INSTRUCTIONS
• This device can be used by children aged 8 and
over and people with restricted physical, sensory
or mental capacity or a lack of experience and
expertise, provided they are under supervision
or have been given instructions about safely
using the device and are aware of the potential
hazards. Children must not play with the device.
Cleaning and maintenance must not be done by
children unless they are over the age of 8 and
under supervision.
• Only use the device indoors, in dry areas and not
in the vicinity of water, other liquids or humidity.
• Do not use the device if it, the cable or power
plug has fallen into water or any kind of fluid.
• Never immerse the device, cable and power plug
in water or any kind of fluid.
• Do not pick up the device if it has fallen into
water or any kind of fluid. Remove the plug from
the power socket immediately. Do not use the
device again.
• Place the device on a flat and stable surface, in a
place where it cannot fall over.
CAUTION! Dispelled water is hot. Do not
touch it to avoid burning yourself.
• The device is equipped with an overheating
safety feature. This is activated if the temperature
becomes too high. If this is the case, you must let
the device cool down before it can be used again.
Switch OFF the device and then remove the plug
from the power socket. Allow the device to fully
cool down. The device needs approximately 30
minutes to fully cool down.
• Remove the power plug from the power socket if
the device is unused for long periods of time.
• When removing the plug from the power socket,
pull the plug itself, not the cable.
• Do not operate the device using an external time
switch or a separate remote control system.
 INSTALLING AND USING
THE DEVICE
Open the packaging carefully before taking out
the device. Make sure the device is complete
and undamaged. If any components are missing
or damaged, contact the vendor and do not use
the product. Retain the packaging or recycle it in
accordance with local regulations.
PARTS & FEATURES DEVICE
12
3
4
56
7
8
9
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mascott MOL-HA-IHWD01-B - Hot water dispencer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mascott MOL-HA-IHWD01-B - Hot water dispencer in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info