Manual Mascott MOL-HA-IHWD01-B - Hot water dispencer (page 2 of 32) (English, German, Dutch, French)

806939

Zoom out

Zoom in

1/32

2EN

ELECTRICITY & HEAT

• Prior to use, check that the mains voltage is the

same as the mains voltage stated on the name

plate of the device.

• Make sure your hands are dry before touching

the device, power cord or plug.

• Plug the power plug into an earthed electrical

outlet that is easily accessible at all times.

• WARNING! Never cover the power plug

or cable with cloths, curtains or any other

material in order to prevent overheating and

potential fire hazards.

• Make sure that the device and power cable do

not come into contact with heat sources, like a

hot hob or naked flame.

• The device must be able to dispel its heat in

order to prevent the risk of fire. So make sure

the device has sufficient free space around it (at

least 10 cm from all sides) and do not place the

device in contact with combustible materials

and/or on or near combustible materials.

• WARNING! The device must not be

covered, in order to prevent overheating

and potential fire hazards.

• Check the power cord regularly for damage.

• Never use the device if the power cord shows

signs of damage, if the device has fallen on the

ground or shows any other signs of damage.

• Switch OFF the device and remove the power

plug if you discover any faults during use, find

any signs of damage, are not using the device or

are cleaning it.

• Make sure the power cord cannot be trodden on

or pinched.

• Do not allow the power cord to hang over sharp

edges and keep it away from hot objects and

naked flames.

• When plugging in the power plug, make sure

people cannot accidentally pull it out or trip

over it.

• Remove the power plug from the power socket

during lightning storms or if unused for long

periods of time.

• Use a 10 amp cable if an extension cable is

required. Cables with a lower amp rating may

burn out.

• When using an extension cable, make sure it is

completely extended.

• WARNING! To reduce the risk of fire or

electric shock, protect the device from

dripping or splashing water surroundings and

keep away from objects filled with liquids, such

as vases. Such objects should not be placed on

or near the device.

USE

• Do not use the device in the vicinity of

flammable materials.

• Do not leave the device unattended when it is

in use.

• Do not touch the waterspout or dispelling water

when the device is operated.

• When operating, do not touch or block the steam

outlet by hand or other stuff.

• Do not open the water tank lid in a rush,

in order to avoid scald generated by hot

steam or cause any other malfunctions.

• Do not use hands or any other body

parts to feel the temperature or steam of

the device whilst is operated.

• Do not use the device to heat anything

other than water.

• Do not fill the device its water tank above the

“MAX” indicator.

• Do not operate the device if the water level is

below “MIN”

• Do not operate the device without water,

or below the minimum water level, to avoid

damaging the heating element.

• Place the device on a flat and stable surface, in a

place where it cannot fall over or overturned in a

sudden and result in burns.

• Do not lean on the device.

• Do not operate the device upside down.

• Do not put the device into a working

disinfection cabinet.

• Do not use the device in the refrigerator

or freezer.

• Never move the device when it is switched ON or

still warm. First switch OFF the device and only

move it when it has cooled down.

• Clean the device thoroughly after use (see

“cleaning and maintenance”).

• Avoid locations subject to vibrations, cold

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mascott MOL-HA-IHWD01-B - Hot water dispencer in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mascott MOL-HA-IHWD01-B - Hot water dispencer Manual

Product: