Manual Marquant mcr 1283 (page 21 of 54) (English, Dutch, French)

168923

Zoom out

Zoom in

1/54

◆

Setting Memory

Press radio preset buttons (numeric buttons 1~6)

on remote control or on the front panel to preset

stations at radio mode. Each band can store six

preset stations. The stations might be FM1, FM2,

FM3, MW1 (AM1) and MW2 (AM2) band. The

operation is as below:

1) Store in Memory

Press and hold desired radio preset buttons

(numeric buttons 1~6) on the remote control or

on the front panel for several seconds, the

current listening station will be stored into the

number button.

2) Retrieve a Preset Station

Press any one of the

radio preset buttons

(numeric buttons 1~6) on the remote control or

on the front panel to retrieve a station which had

been stored in the memory in advance and the

chosen frequency will be shown on display.

◆

Automatic memory storing & program

scanning

1) Program scanning

Shortly press

AMS

button on remote control to

scan preset station.

2) Automatic memory storing

Press and hold press

AMS

button on remote

control for about several seconds, the radio

searches from the current frequency and

checks the signal strength until one cycle

search is finished. And then stations are stored

into the preset number button in turn according

to the strength of the stations. When auto

search is finished, it will enter into preset scan

mode automatically.

Note:

Press and hold 1-6 numeric buttons on

the remote control for about several seconds,

will store the current station to the current

numeric key position.

◆

◆◆

◆

Mono/Stereo

Press ST button on remote control to select mono

or stereo mode. You can sometimes improve

reception of distant stations by selecting mono

operation.

◆ RDS (RADIO DATA SYSTEM) OPERATION

1) Setting AF function

In FM mode, Press and hold TA/AF button on

the front panel to switch on or off AF function.

In AF on mode, “AF” will flash on the screen.

2) In FM mode, shortly press

TA/AF

button on the

front panel to switch TA on or off. When TA on,

the unit will search Traffic Announcement

automatically.

When received a Traffic Announcement station,

the unit will change to the Traffic

Announcement station automatically. Shortly

press

TA/AF

again to exit TA mode.

3) Using

PTY

to Select Program

Press

PTY

button on the front panel to start the

station search:

POP M, ROCK, EASY M, LIGHT M, CLASSIC,

OTHER M, JAZZ, COUNTRY, NATION M,

OLDIES, FOLK M, NEWS, AFFAIRS, INFO,

SPORT, EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED,

WEATHER, FINANCE, CHILDREN, SOCIAL,

RELIGION, PHONE IN, TRAVEL, LEISURE,

DOCUMENT.

Use

VOL+/-

buttons on the remote control or

volume knob

on the front panel to change the

items, when you choose the desired items.

When PTY is selected, the radio starts to

search corresponding PTY information, and

stops if the corresponding PTY information is

detected.

If corresponding PTY information is not existed

any more, PTY engaging is automatically exit

to normal mode.

Notes:

AF: Alternative Frequencies

Frequency list of broadcasting stations

transmitting the same program

TA: Traffic Announcement Identification

Identification data showing traffic information

is being transmitted or not

PTY: Program Type Code

Contents of programs such as news, light

music, sports etc.

TP: Traffic Program Identification

Identification data for traffic

information-broadcasting station

OPERATION

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marquant mcr 1283 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marquant mcr 1283 Manual

Product: