168923
20
Zoom out
Zoom in
Previous page
1/54
Next page
20
4)
C-
: Display the remaining time of the current
chapter.
5)
T
: Display the played time of the current title.
6) T-: Display the remaining time of the current ti
tle.
7) C: Display the played time of the current chapter.
8)
Display the current disc’s LANGUAGE, AUDIO
TYPE, SUBTITLE LANGUAGE and PLAY
ANGLE.
Note: The displayed information is different
according to different type of discs.
Last Play Memory
1) During disc playback, if you turn off the unit a
nd
then turn on the unit again, the DVD unit will
resume playing from the point that just
interrupted.
2) During disc playback, if you press
MODE
button to switch to other mode, then return to
DVD mode again, the unit will resume playing
from the point that just interrupted.
USB PLAY OPERATION
On the front of the unit, when you open the USB
cover, you will see an USB interface. An USB device
can be connected through this interface.
When you connect an USB device through the
interface, the unit will search the files in the US
B
driver and start to play automatically.
If in other mode, you can also press
MODE
button
to select USB mode.
When playing the audio/video/photo files in the
device, the operation is the same with DVD
operation described above.
NOTE:
When in USB play mode, be sure not to remove
the USB driver from the USB interface.
When stop USB play, you can remove the USB
drive, after remove USB driver from the unit.
When connecting an MP3 player and there has
normal battery in the player (non rechargeable
battery), you should remove the battery from
the MP3 player then connect it to the USB
interface. Otherwise, it may cause battery burst.
SD CARD OPERATION
On the front of the unit, when you open the USB
cover, you will see a SD card interface. You can
insert a SD card into the interface.
When you insert a SD/MMC card in the SD/MMC
interface, the unit will search the files in the ca
rd and
start to play automatically. The operation is the
same with the DVD operation described above.
If in other mode, you can also press
MODE
button
to select SD/MMC mode.
The corresponding operation please refer to the
DVD OPERATION.
RADIO OPERATION
Switching to Radio Mode
Press
MODE
button on remote control or
MODE
on
the front panel start radio mode.
The band/frequency/station/clock and other
information will display on the display.
Selecting the Frequency Band
Press
BND
button on remote control to select
desired band. The reception band will change in
the following order:
FM1FM2FM3MW1/AM1MW2/AM2
Selecting Station
Press / buttons on the remote control or
press
/ on the front panel shortly to adjust
the frequency manually.
Hold Press
/ on the remote control or hold
press
/ on the front panel for fast tuning.
The frequency is updated correspondingly on
display.
OPERATION
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marquant mcr 1283 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marquant mcr 1283 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info