613325

Marmitek IR Control 10 XTRA Manual

6
Zoom out
Zoom in
Previous page
1/68
Next page
6 © MARMITEK
5. INSTALLATION
In order to check that the system works correctly, it is advisable to first test
the set-up you had in mind. To do so, connect everything as described
below but do not stick the components securely.
5.1 Locating the IR Receiver
Place the very small IR Receiver in a way that it is visible for your (infrared)
remote control and it can receive the sent commands (max. 10 meters). The
most logical place for the IR Receiver is, for example, on (or integrated into)
the cabinet containing the A/V equipment, or near the TV.
Exposed IR Receiver (IR Control 10 XTRA™)
x You can run the cable underneath or behind, using the notch at the
back of the IR receiver housing; this allows the cable
to be hidden easily.
x Use the self-adhesive strip which is supplied to locate
the IR receiver just about anywhere you please.
x Experiment with the location before you stick the IR
receiver in its final position.
Hidden IR Receiver (IR Control 11 XTRA™)
x First test if everything works well in the desired set-up before drilling a
hole (12mm) to mount the hidden IR receiver.
x After mounting, click one of the two supplied caps (black or white) on
the IR Receiver's front if desired.
5.2 Placing the IR extension cable with one blaster LED
Marmitek recommends the use of IR blaster LEDs because they can
operate multiple A/V devices at the same time and they are very easy to
install. Use the supplied IR extension cable with emitter LEDs only as
solution if one or more devices cannot be operated (see chapter 5.3).
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek IR Control 10 XTRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IR Control 10 XTRA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info