Manual Marmitek IR Control 10 XTRA (page 5 of 68) (English, German, Dutch, French, Italian, Spanish)

613325

Zoom out

Zoom in

1/68

IR CONTROL 10/11 XTRA™ 5

ENGLISH

4. CONNECTIONS

The IR Module is the main component that connects IR Receivers, the

power adapter and IR Extender Cables to one another. All of the IR Module

connections are now explained so that you can get the most out of all of the

options available.

4.1 IR Input

IR RCVR:

standard IR input (3.5mm

jack) for the enclosed IR

Receiver

SCREW TERMINAL: IR

input for connecting up to

6 IR Receivers in parallel.

+12VDC: Red GND: Black STATUS: Yellow IR DATA: White

4.2 POWER Input

12VDC: Power adapter for the IR Module (enclosed), 5VDC/200mA

STATUS: Power adapter for the status signal (not enclosed), 5-24VDC or 5-

12VAC

Some A/V equipment (eg AV Receivers) have a switched power supply

(230VAC) at the back. This output automatically turns ON and OFF

whenever the A/V device is switched ON or OFF. By connecting a power

adapter (5-24VDC or 5-12VAC) to this switched output and connecting it

with the STATUS input from the IR module, a signal is sent to the IR

Receiver. When the A/V device is switched ON, a GREEN light is lit on the

IR Receiver.

4.3 IR Output

1 – 4: four mini jack outputs for connecting the IR extension cables.

EMITTER / BLASTER: every output can be switched separately for

connecting blaster or emitter LEDs.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IR Control 10 XTRA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek IR Control 10 XTRA Manual

Product: