494243

Marmitek Invisible Control 4 Manual

4
Zoom out
Zoom in
Previous page
1/29
Next page
3. HOW DOES IT WORK?
Place the Invisible Control within sight, on or below the cabinet that the A/V equipment
is in. Stick the IR LEDs on the IR eye of your equipment and then wire these to the
Invisible Control. The Invisible Control now receives the signal from your own remote
control and transmits it to the IR LEDs connected to your equipment. You can now use
your own remote control to operate your equipment while it is still placed in a closed
cabinet.
4. INSTALLATION
1. Plug the power adapter into the back side of the Invisible Control or insert 4 pieces
‘AAA’ size ALKALINE battery (not included) into the battery compartment with cor-
rect polarity.
2. Connect the wire with the two IR LEDs (the IR extender) to the back side of the
Invisible Control. It doesn’t matter whether you use the first or the second connec-
tion.
3. Place the Invisible Control within sight and within reach of your remote control (max.
8 m) on or below the cupboard the equipment is in.
4.
Lead the wire with the IR LEDs (the IR extender) to the A/V equipment in such a way
that the IR LEDs (transmitters) are on the front of your equipment (e.g. via the back
of the cabinet). The IR LEDs have self-adhesive tape on the back. Use this to stick
them onto the IR sensor of your equipment. This should be done very carefully and
precisely. Test the position of the IR LEDs first, before you stick them onto the sensor.
ATTENTION: If you are only using one appliance, then you do not need to
use the second IR LED. Never remove it from the wire!
5. The Invisible Control receives the signal from your remote control and transfers it to
an electrical signal, which is passed on to the IR LEDs.
6. This means all signals from your remote control are passed on to your equipment.
4 © MARMITEK
LEDs IR
Invisible Control Black/White 4
Remote control
A/V-devices in
closed cabinet
Place the IR LED’s on the IR displa
y
panels of the A/V-devices
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek Invisible Control 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Invisible Control 4 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info