Manual Marmitek HomeGuard MS8000 (page 5 of 58) (English, German, Dutch, French, Italian, Spanish)

494280

Zoom out

Zoom in

1/58

5HOMEGUARD™

eNgLIsh

5. LED indicator: Indicator flashes if remote transmits a command. If indicator does not flash

or lights up weakly, replace the batteries. The battery holder is located inside the remote.

The back of the remote can be easily opened using your fingernails or a small screwdriver.

Only use two 3V lithium batteries model CR2016. Push the ARM key for more than 3

seconds and release the button; the indicator blinks. If batteries are replaced, you have to

reregister with the base station (refer to installation).

4. seLeCTINg a suITaBLe LoCaTIoN

The base station has a so-called passive infrared element that detects any change in temperature

within its range. A certain amount of heat related to human beings is detected for an alarm.

However to achieve the best performance of your HomeGuard, note following installation

recommendations before installing:

a. It should be located at approx. 170-180cm height on a fixed vertical surface e.g. wall or

cupboard

b. Choose a location where an intruder may pass the monitored area at all time in an early

stage of intrusion.

c. Choose a location near to a wall outlet and telephone socket.

d. The sensor should not be placed above or near heating elements or in front of air-

conditioners.

e. Do not mount the sensor on a metal surface or next to electrical equipment such as TV sets

or computers.

Caution:

a. Radio equipment (e.g. wireless headphones or loudspeakers) working on a frequency band

of 433MHz will not create a false alarm, however, these devices will limit the RF range of

the remote control considerably.

b. Pets, e.g. dogs or cats, may trigger the alarm, and should therefore not be kept in the same

room as where the activated sensor is mounted.

5. PIN Code seTTINg:

Your HomeGuard can be operated and programmed by using a so-called PIN code (Personal

Identification Number). The factory default code is: [0000]. To avoid unauthorised use, enter

your own PIN code.

Note: Choose a code you will easily remember, since the HomeGuard will recognise this code

only for further operation.

1. Enter your current PIN (Personal Identification Number). If you have never changed this code

before, the factory default code is [0000]. You will hear three high tones and one low tone

as confirmation. The green indicator will start flashing.

2. Press 5 on the keyboard of the HomeGuard: One low tone is given for confirmation.

3. Enter a new 4-digit PIN code: You will get three high tones and one low tone as confirmation

and the indicator stops flashing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek HomeGuard MS8000 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek HomeGuard MS8000 Manual

Product: