494244

Marmitek GigaControl 450 Manual

5
Zoom out
Zoom in
Previous page
1/32
Next page
ENGLISH
5GigaControl450™
• Some satellite receivers must be placed closer to the GigaControl450™ as a result of the
effect the two devices have on one another. Try the Transmitter at a range of locations in
order to obtain the best range.
5. FREQUENTLY ASKED QUESTIONS
• In a few cases, the Receiver may be disrupted by interference and cannot, therefore, pick
up the signals it receives. If this is the case the red light will be continuously illuminated and
the Receiver must be relocated. This interference is caused by equipment in the vicinity such
as dimmers, energy-saving light bulbs, IR alarms and so on. Direct sunlight can also disrupt
the Receiver.
• GigaControl450™ does not work with remote controls which use High Frequency signals
(such as B&O)
Do you have other questions that have not been resolved by the above information?
Please go to www.marmitek.com
6. TECHNICAL DATA
Range: Up to 100m free field, up to 25m through walls and ceilings
Power: 100 - 240 VAC 50/60 Hz
Frequency: 433.92 MHz
Dimensions: 77 x 38 mm
Frequency range: 30-60 KHz.
IR reception range: ± 10 metres
7. OPTIONAL ACCESSORIES
IR EYE (Art. no. 09682)
The IR Eye extends the IR signal of your remote control in combination with the GigaControl450™.
Using the infrared extender, you can operate your A/V equipment even when it is in a closed
cupboard, out of sight or in another room.
For more information, checkout www.marmitek.com
GC450 Extra IR receiver (Art. nr. 08033 / 08034)
With the help of an extra IR Receiver you can also control your A/V equipment from another
place.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek GigaControl 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek GigaControl 450 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info