494244

Marmitek GigaControl 450 Manual

4
Zoom out
Zoom in
Previous page
1/32
Next page
4 © MARMITEK
3. HOW DOES IT WORK?
HD RECORDER
SET-TOP BOX
SATELLITE
AUDIO SET
WALL
IR TRANSMITTER
IR RECEIVER
Point your remote control at the GigaControl450™ IR Receiver. The IR Receiver receives these
infrared signals, converts them into RF signals and sends them onto the GigaControl450™ IR
Transmitter. The IR Transmitter then converts these back into infrared signals and sends them
to your HDD-recorder, set-top box, satellite decoder, audio set, etc.
4. INSTALLATION
4.1 IR Receiver
1. Place the IR Receiver in the room/area from which you wish to operate your equipment.
2. Point the front of the IR Receiver (with Marmitek logo) towards the point at which you want
to use the remote control (maximum 5 metres).
3. Pick a channel on the back of the IR Receiver (16 channels/frequencies available) using the
dip switches. Use a pen or other pointed object to do so.
4. Connect the Power Adapter to the IR Receiver and insert this into the mains socket.
4.2 IR Transmitter
5. Place the IR Transmitter in the room/area in which the A/V equipment you wish to operate
is located.
6. Point the front of the IR Transmitter (with Marmitek logo) towards the equipment you wish
to operate (maximum 4 metres).
7. Pick the same channel on the back of the IR Transmitter (16 channels/frequencies available)
as you chose on the IR Receiver, using the dip switches.
8. Connect the Power Adapter to the IR Transmitter and insert this into the socket.
4.3 Range between Transmitter and Receiver depends on:
• The number of floors and walls through which the signal has to travel and the materials used.
• Other 433 MHz sources such as wireless headphones or wireless speakers can significantly
limit the range of the GigaControl450™. The best result is obtained if these sources are
switched off when using the GigaControl450™. The GigaControl450™ works fine with
wireless telephones.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek GigaControl 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek GigaControl 450 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info