494334
3
Zoom out
Zoom in
Previous page
1/5
Next page
13
Bij het aandraaien van de
schroeven van de
Marmitek
X-10
modules, mag het aandraaikoppel
maximaal 0,5 Nm bedragen. Bij
een hoger koppel bestaat kans
dat de aansluit klemmen
afbreken. Mocht een van de
aansluit klemmen afbreken dan
mag de
Marmitek
X-10 module
niet meer worden toegepast.
Marmitek X-10 modules dienen te allen
tijde bereikbaar te zijn voor programmeren
en onderhoud/service.
PROG.
N
L
DAX
10
M = max. 0,5 Nm
Max. aandraaikoppel
P
PROG.
N
L
DAIX
10
General installation and user manual
for X-10™ home automation modules & components
P
PROG.
N
L
SAIX
16
General installation and user manual for X-10™
ATTENTION Read carefully!
Please read these user instructions completely and carefully
before using the Marmitek X-10 modules. You must observe the
instructions regarding the safety, installation and operation of
the modules used in the Marmitek home automation system.
These installation and operating instructions are an integral part
of this product. They contain important instructions regarding
the installation and operation of Marmitek built-in modules
(hereafter to be called Marmitek X-10 modules) & components.
Keep these user instructions in a safe place!
In addition to these general user instructions, one or more
supplementary user instructions apply to each specific Marmitek
X-10 module. We recommend that you have the Marmitek
system installed, connected, assembled and programmed by a
trained and certified Marmitek installer.
!
17
home automation modules & components
Guarantee terms
We guarantee the reliability of the Marmitek X-10 modules &
components supplied by us for the duration of two year after
installation; this date must be proven in writing, e.g. with an
invoice. Marmitek offers a two-year guarantee against material
and/or construction defects on all Marmitek X-10 modules
supplied. This guarantee covers free repair or replacement
(at Marmitek's discretion) of any defects found in the Marmitek
X-10 modules, which can be proven to be the result of
production errors, faulty construction, materials or defective
workmanship on our part.
The guarantee covers:
The replacement or free repair (at Marmitek's discretion) of
faulty Marmitek X-10 modules.
The guarantee must be registered with the supplier from
whom you obtained the product within one year after
installation. The supplier must notify Marmitek in writing of
the defects found.
Faulty Marmitek X-10 modules must at all times be returned
(through the supplier from whom the Marmitek X-10 modules
were obtained) and they become Marmitek's property.
Shipment and transport costs incurred in returning the faulty
Marmitek X-10 modules will not be reimbursed.
The guarantee does not cover costs associated with the
inspection, removal and return etc. of faulty Marmitek X-10
modules
or the reinstallation of repaired or replacement
Marmitek X-10 modules.
18
General installation and user manual for X-10™
Marmitek X-10 does not guarantee, neither does it accept
responsibility for, malfunctioning of and/or whatever damage or
consequential damage to any products that are directly or
indirectly connected to the Marmitek X-10 module. Marmitek
accepts no responsibility whatsoever for any additional claims
(see also Limitation of liability further in this manual).
There is no entitlement to guarantee for the Marmitek X-10
modules or the entitlement to guarantee will become void in the
following cases/situations:
Damage or defects to the Marmitek X-10 modules arising
from faulty installation, connection or damage arising from
non-compliance or insufficient compliance with the
instructions and stipulations in the manuals provided.
Incorrect operation or damage arising from negligence or
unlawful use of the product (such as application outside the
housing sector).
Incorrect maintenance, handling and application or use of
Marmitek X-10 modules and components and when
modifications or repairs are carried out on them by third
parties without the express permission of Marmitek. Insofar
as the principal has installed the Marmitek X-10 modules and
components himself, a condition of this guarantee is that the
product has been installed correctly.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek AFX3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek AFX3 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info