494219
58
Zoom out
Zoom in
Previous page
1/59
Next page
Precautions
Releasing the shutter with no film in the camera
The film transport mechanism has a built-in safety lock
which
prevents the shutter from being released after the
last exposure on a roll of
film,
or when there is no film in
the camera. Thus, when the shutter release button locks
under such circumstances, do not force it To release the
shutter, merely set the multiple-exposure lever to “MULTI”.
Mirror Lock-up
When the mirror is locked in the up position and the
camera is outdoors there is a small possibility of sunlight
entering the lens, focusing on the rubberized-cloth focal
plane shutter, and burning it to a certain degree. Although
such a possibility is remote, caution is called for. There-
fore, when using mirror lock-up outdoors, always return
the mirror to its normal position after completing all your
mirror lock-up exposures. If the interval between mirror
lock-up exposures is long, lower the mirror while waiting.
The
0
position on the Shutter Speed Dial
If the shutter is released with the shutter speed dial set to
the 0 position, the mirror will lock in the up position and
the film advance knob will not move. If the camera is left
in this condition the battery will lose its power within
several hours
The 0
position
is only for use with the PD Prism Finder.
Photographing at Low Temperatures
When photographing at low temperatures, be careful of
the following points to maintain camera performance.
1. Be sure to use a fresh battery.
2. When using electronic flash, set the shutter speed dial
to 1/30 sec. or longer.
3. Place the camera in the outside air only during the
moment of exposure.
*When working at extremely low temperatures, it some-
times becomes impossible to wind the film advance crank
after the shutter has been released. In such a case, after
placing the camera in a warm place, it will become possi-
ble to wind the film advance crank if the upper shutter re-
lease button is strongly depressed as far as it will go.
*
A battery that malfunctions at low temperatures will
become usable again when it is returned to normal temper-
ature. However, the battery should not be subjected to
rapid and extreme changes of temperature, lest it grow
unreliable.
57
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya M645 1000S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya M645 1000S in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info