481822
9
Zoom out
Zoom in
Previous page
1/12
Next page
Lift the food pusher handle.
Den Andrücker anheben.
Ensure the food carriage is
in the start position.
Den Schlitten bis zum
Anschlag zurückziehen.
Select the required slice
thickness using the thickness
control knob.
Die gewünschte Schnittstärke
einstellen.
Hold the food in place using
the food pusher handle.
Das Produkt mithilfe des
Andrückers festhalten.
Collect the food slices with
your left hand or use a plate.
Die Scheibe mit der linken
Hand aufnehmen oder auf
einen Teller gleiten lassen.
Whilst the blade is rotating,
move the carriage back and
forth using your right hand.
Den Schlitten nach hinten
schieben.
Place the food on the carriage
and push it firmly against the
back plate.
Das zu schneidende Produkt auf
den Schlitten legen und leicht an
die Anschlagplatte dcken.
Switch the appliance off.
Das Gerät ausschalten.
Always use the food pusher when slicing food as the blade is extremely sharp.
Do not use your food slicer for more than 10 minutes at a time. The appliance is fitted with a thermal failsafe which
will automatically cut the motor out if the slicer is overloaded or if it has been running for too long. If this happens,
switch the appliance off and leave the motor to cool for at least 30 minutes before using the slicer again.
Das Messer ist sehr scharf. Benutzen Sie immer den Andrücker, vor allem wenn das zu schneidende Produkt klein ist.
Benutzen Sie den Allesschneider nicht länger als 10 Minuten. Er ist mit einem Hitzeschutz ausgestattet, der das Gerät
bei zu großer Belastung oder zu langem Gebrauch automatisch ausstellt. In dem Fall kommt es zum Stillstand, aber
die Kontrollanzeige leuchtet weiter. Wenn das eintreten sollte, schalten Sie den Allesschneider aus und warten Sie
mindestens 30 Minuten, bevor Sie ihn erneut benutzen.
Switch the appliance on.
Das Gerät einschalten.
!
Turn the thickness control
knob back to 0 after use.
Nach dem Gebrauch die
Scheibenstärke auf 0 stellen.
Please wash all parts before first use.
Vor dem ersten Gebrauch sämtliche Teile mit einem feuchten weichen Tuch abwischen.
Turn the appliance over and
unwind the power cable.
Das Kabel an der Unterseite
des Gerätes so weit wie nötig
abwickeln und anschließen.
If the slice thickness is not
correct, adjust the setting.
Wenn die Scheibe nicht die
gewünschte Stärke hat, die
Einstellung ändern.
USE / GEBRAUCH
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magimix Le Trancheur T 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magimix Le Trancheur T 250 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info