743786
6
Zoom out
Zoom in
Previous page
1/7
Next page
Page 6 di 8
II_Pulse_09_eng
Mounting Instructions
BOLTWORK REQUIREMENTS AND MOUNTING INSTRUCTION
In the LOCKED position, there should be approximately 1 mm clearance between the
lock bolt and the cavity in the blocking bar of the boltwork. The lock bolt must move
freely into the cavity.
In OPEN position, there should be minimum
3mm and maximum 5 mm clearance
between the lock bolt and the bloching bar
of the boltwork.
Connect the keyboard cable to the lock using the
input 1
making sure it is fully inserted and secured.
Any interfaces or port connected batteries will be at the
entrance number 2.
ELECTRONICS FUNCTION TEST (with door open)
Press and hold [5] until a double signal sounds and the light stays ON.
Enter the all keys in exactly this sequence:
[1]-[2]-[3]-[4]-[5]-[6]-[7]-[8]-[9]-[0]
Push buttons slowly so you recognize the signaling of the lock. A double signal indicates that the keypad
and the lock communicate properly.
A long signal indicates that the electronics may be damaged. (In this case, contact technical support)
MECHANICAL TEST (with door open)
Enter code (1,2,3,4,5,6). The lock emits a double signal for the correct code.
Turn Entry unit clockwise until stop. Lock bolt must move freely. Boltwork/door can be opened.
Move boltwork into Locked Position. Lock bolt must fully extend and secure.
The bolt must come out completely and ensure the closure.
Provided around the bolt there is space in all directions when the motion is brought in position CLOSED.
Repeat several times function test before closing the safe door.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Locks Pulse Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Locks Pulse Pro in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-Locks Pulse Pro

M-Locks Pulse Pro User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info