743786
3
Zoom out
Zoom in
Previous page
1/7
Next page
Mounting Instructions
II_Pulse_09_eng
Page 3 di 8
Cut the grooved shaft to the appropriate length: measure door thickness (from mounting surface of the entry unit to
the mounting surface of the lock) and add
40 mm
(1.6”). Prepare the mounting and cable holes. Fix the screws
(M4) / Imperial 8-32 UNC and the rotating back plate, placing it on the "UP" to permit the keypad rotation.
The rotation kit consists of 2 bushings, 2 thread forming countersunk M4 / Imperial 8-32 UNC screws, 1
plastic pin and 1 spring.
Fix the bushings to the keypad housing using the supplied screws, threading them directly to the case using a
screwdriver, taking care to be positioned perpendicular to the turret. Insert the pin completely in the spring and then
place it into the specific hole in the case.
Insert the grooved shaft, with the cutting edge first, all the way into the keypad housing.
Now push the cable into the groove until flat over the entire length of the shaft. Route the cable and shaft through
the spindle hole of the door, hold the unit at an approximately 10:00 o’clock position, and slide it on the rotating back
plate. Then turn unit clockwise into straight position at 12:00 o’ clock until you hear a click, reaching the final position.
Remove adhesive film from pad and line up margins carefully, before fixing it.
Connect one (1) battery to the battery clip. Only use 9V-ALKALINE batteries
from brand name manufacturers like Procell and DURACELL™.
STATIONARY MOUNTING (only for T6530 and T6630)
The diameter of the cable hole should be 9-12 mm. The hole must be deburred well to avoid damage to the cable.
Lift the pad so that you can see mounting holes. Let lock’s connecting cable pass through the hole on safe’s door.
Insert and fix the two screws, paying attention to cables, they have not to be squashed by housing and let battery
cables have easy access.
Remove adhesive film from pad and line up margins carefully, before fixing it.
Connect one (1) battery to the battery clip. Only use 9V-ALKALINE Duracell Procell- or Energizer batteries.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Locks Pulse Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Locks Pulse Pro in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-Locks Pulse Pro

M-Locks Pulse Pro User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info