707282
69
Zoom out
Zoom in
Previous page
1/117
Next page
69
Relative Messages
Most software controls receive “absolute” messages by scanning the position of a fader or
encoder and using that position’s value. Some other software controls, however, receive
“relative” messages, which simply increment/decrement the value (as opposed to sending a
precise value to designate a position).
To set an axis of the X/Y pad to send relative messages:
1. Press Edit to enter Edit Mode. The Edit button will light up.
2. Press the X or Y button. X or Y will appear in the display.
3. Press the Ctrl Assign key. The display will show ASGN for 1 second and then show X or
Y and a number for the type of message it sends.
4. Use the numeric keys (09) or Preset Down/Up () buttons to enter the desired MIDI
CC number (000127).
5. Press the Data 2 key. The display will show DATA2 for 1 second and then show X or Y
and the value at its minimum position.
6. Use the numeric keys (09) or Preset Down/Up () buttons to enter one of the following
values for the desired relative operation:
128 or 130: Moving your finger in the positive direction increments the value. Moving
your finger in the negative direction decrements the value.
Note: If using the 128 setting does not work with your software, use the 130 setting
instead; not all software applications respond to the same type of relative message.
129 or 131: Moving your finger in the positive direction decrements the value. Moving
your finger in the negative direction increments the value.
Note: If using the 129 setting does not work with your software, use the 131 setting
instead; not all software applications respond to the same type of relative message.
7. Press the Enter key. The axis is now set to send relative messages for the assigned MIDI
CC, and you will exit Edit Mode.
To cancel your changes instead, press Edit. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
69

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio Code 49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio Code 49 in the language / languages: English as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-Audio Code 49

M-Audio Code 49 Quick start guide - English, German, French, Italian, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info