707282
31
Zoom out
Zoom in
Previous page
1/117
Next page
31
To assign or edit a control:
1. Press Edit to enter Edit Mode. The button will light up.
2. Select the control you want to assign or edit by moving or pressing it. Its name (and
number, if available) will appear in the display.
3. Set any of the four control settings below. You can do more than one and in any order:
Control Assign:
i. Press the keyboard’s Ctrl Assign key.
ii. Use the keyboard’s numeric keys (09) or Preset Down/Up () buttons to
enter the number that corresponds to the desired MIDI message as specified in
Appendix > Parameter Numbers.
Data 1 (if applicable): This applies only to a button, a pad, or the sustain pedal when
its MIDI message is a non-registered parameter number (NRPN, a parameter number
higher than 127).
i. Press the keyboard’s Data 1 key.
ii. Use the keyboard’s numeric keys (09) or Preset Down/Up () buttons to
enter the Data 1 value, which will appear in the display. This number corresponds
to a specific MIDI parameter specified in Appendix > Parameter Numbers.
Data 2:
i. Press the keyboard’s Data 2 key.
ii. Use the keyboard’s numeric keys (09) or Preset Down/Up () buttons to
e
nter the Data 2 value, which will appear in the display. This number corresponds
to, usually, the minimum value set on a control.
Data 3:
i. Press the keyboard’s Data 3 key.
ii. Use the keyboard’s numeric keys (09) or Preset Down/Up () buttons to
enter the Data 3 value, which will appear in the display. This number corresponds
to, usually, the maximum value set on a control.
4. To save your changes, press the keyboard’s Enter key. Your changes will be saved and
you will automatically exit Edit Mode.
To cancel your changes instead, press Edit. You will exit Edit Mode without saving anything.
Important: If you power off your Code Series keyboard without saving/storing your preset,
you will lose any assignments or changes you have made. See Presets and Memory >
Storing Presets to learn more.
Ctrl Assign
Numeric Keys (09)
Enter
31

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio Code 49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio Code 49 in the language / languages: English as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-Audio Code 49

M-Audio Code 49 Quick start guide - English, German, French, Italian, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info