599453

Lowrance EP-10 Fuel Flow Manual

2
Zoom out
Zoom in
Previous page
1/8
Next page
2
All Lowrance NMEA 2000 capable devices are NMEA 2000 certified or
certification is pending. See our web site for the latest product status
information.
The EP-10 consists of a blue female locking cable connector and the
sensor module. The sensor module contains a turbine to measure fuel
flow and electronics which convert flow data to the NMEA 2000 data
format. The cable length from the connector to the smart module is 10
feet. The EP-10 sensor is designed to work with gasoline engines only.
This sensor has been optimized to measure flow rates between 0.6 to 45
gallons (U.S.) per hour, but it will operate at flow rates outside that
range. The sensor will add 0.5 PSI of back pressure on the fuel system
with a flow rate of 20 gallons per hour. At the rate of 40 gallons per
hour the back pressure will be 1 PSI.
The EP-10, like other Lowrance Electronic Probe (EP) sensors, is
designed only for use with a NMEA 2000 Network. It must be
connected to a NMEA 2000 network or it will not function.
Tools and Supplies
Your EP-10 sensor comes with a T connector. The T connector is needed
to attach the sensor to a LowranceNET NMEA 2000 network. If you are
connecting to an existing LowranceNET network, those are all the
electronic components you need. If this is the first sensor you are
connecting, you also will need a one-time purchase of a LowranceNET
Node Kit.
LowranceNET Node Kit for a NMEA 2000 network. Includes a 2 foot
extension cable, T connector, 120-ohm male terminator and 120-ohm
female terminator.
For complete instructions on setting up a new NMEA 2000 network or
expanding an existing one refer to the "Setup and Installation of NMEA
2000 Networks, General Information" document (part number 988-
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance EP-10 Fuel Flow at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance EP-10 Fuel Flow in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info