711439
1
Zoom out
Zoom in
Previous page
1/2
Next page
User Guide
Using the Z200 speakers
Your speakers connect to your audio-source device using a 3.5mm auxiliary connector.
To use your speakers:
1. Connect the power cable to the speakers and a power source.
2. Connect your source device using the attached 3.5mm auxiliary cable.
NOTE: You can also connect a device to the auxiliary input port on the front of the right
speaker (below the music note icon).
3. Turn the speaker on and adjust the volume using the Power/Volume knob.
4. Play music from your audio-source device.
5. Adjust the tone using the dial on the right side of the right speaker. (Optional)
You can also connect headphones to the headphone output port on the front of the right speaker
(below the headphone icon).
Distorted audio from the Z200 speakers
If the audio coming from your Z200 speakers sounds distorted, try these suggestions:
Make sure all cables and connectors are connected securely to both your speakers and
your device.
Adjust the volume on both the speakers and your audio source.
Adjust the tone level on the right speaker.
NOTE: If you're streaming audio content from the internet to your device, it could be the internet
connection and not your speakers causing the problem. Try audio that is stored on your device to
verify.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Logitech Z200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Logitech Z200 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info