234611

Lite-On lvw 5001 dvd recorder ext retail Manual

35
Zoom out
Zoom in
Previous page
1/35
Next page
Troubleshooting Guide
Picture
The image from this unit does not appear on the
television.
--> Make sure that the TV is connected to the AUDIO/VIDEO
terminal, SCART-S-VIDEO out terminal or COMPONENT VIDEO
OUT terminals on this unit. (refer to “CONNECTING UP section)
--> Make sure that the television’s input setting is correct.
--> Make sure that a disc is well-placed on the disc tray and is
compatible to the local TV system (NTSC or PAL)
--> Check whether the recorder is set to progressive with an
incompatible TV. Reset by pressing [u], “5,” “0,” “0,” and “1” on
the remote control and then press [ENTER].
The image from this unit appears with noises.
--> The disc is distorted or flawed.
--> If the picture output signal from the recorder passes through
your VCR to get to your TV, or if you are connected to a
combination T V/VIDEO player, the copy protection signal applied
to some DVD programs could affect picture quality. If you still
experience this problem even when you connect your recorder to
your TV, try connecting your recorder to your TV’s S-VIDEO
output.
The image from an external input is distorted.
--> If the video signal from the external component is copy-
protected, you can not connect via the recorder. Connect the
component directly to your TV.
Sound
There is no sound
--> Check the audio cable connection.
--> Check if the audio cord is damaged.
--> The input source setting on the amplifier is incorrect.
--> There’s no sound when the picture is paused or during
scanning (even forwards at regular playback speed) or slow
motion play. Press [PLAY] to resume regular playback.
--> If the audio signal does not come through the DIGITAL OUT
(OPTICAL or COAXIAL) jacks, check the AUDIO OUT settings.
The sound from this unit is not presented prop-
erly or is distorted.
--> Check the audio cable connection.
--> Check if the audio cord is damaged.
--> Make sure that the amplifier/receiver or TV is set to the correct
input and the volume is turned on.
--> If the sound is distorted, try cleaning the cable plugs.
Playback
Can’t playback a disc recorded using this re-
corder or another player
--> If the disc was recorded in video mode, make sure that it’s
finalized.
--> Some players will not play recordable DVD discs when
recorded in video mode and finalized.
--> Discs recorded with copy-once material cannot be played on
non-CPRM compatible players.
The recorder starts playing the disc
automatically.
--> The DVD VIDEO features an auto playback function.
Timer Recording
Timer recording does not work properly
--> The timer program is incorrect. Correct the program.
--> Different timer program times overlap.
--> The clock setting is wrong. Go to setup to set the right time and
date.
--> An already finalized DVD+R has been inserted: change disc.
The timer program remains even after recording
finishes.
--> The timer program remains if set to daily or weekly.
Recording
Can’t record.
--> You haven’t inserted a disc or the disc you inserted cannot be
recorded on. Insert a disc the unit can record onto.
An alternate audio track cannot be recorded.
--> Second Audio Program (SAP) is not available for all programs.
--> The recorder does not feature “Second Audio Program (SAP)”
function.
Recording does not start immediately after you
press the [RECORD] button.
--> Disc preparation process is taking place and will take a short
while. (applicable to DVD-R/RW and DVD+R/RW discs)
TV channel
TV channels cannot be changed.
--> Switch the input signal source of the recorder to “TV.”
--> Connect the antenna cables correctly.
No playback on DVD recorder.
--> There’s no recording on the disc. Check the disc first.
--> A unplaybackable disc type is inserted. Check the playable disc
type list.
--> The way you inserted the disc is wrong. Insert the disc with the
label side facing up. If there’s no label on the disc, check the disc
retailer.
--> Wrong region code: The region code on the recorder and the
disc must match.
--> Parental control is on: you have to unlock it first. (default code of
the recorder: 0000)
--> Check of the cables are secured between the TV set and the
recorder.
Others
The disc does not open/close.
--> Contact your local dealer or local authorized service facility.
The unit stops at “HELLO” and does not respond
to any other commands.
--> Turn the unit off and turn it on again. If the unit still does not
respond to any commands, unplug the power cord, reconnect it
and turn it on again. Contact local dealer or authorized service
facility if the unit still does not work.
… 35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lite-On lvw 5001 dvd recorder ext retail at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lite-On lvw 5001 dvd recorder ext retail in the language / languages: English as an attachment in your email.

The manual is 9,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info