602387
3
Zoom out
Zoom in
Previous page
1/11
Next page
2
Linksys AC1200 Max Wi-Fi Range Extender
Audio Jack
Ethernet Power
Wi-Fi Protected
Setup
button
Back
Power Switch European versions only.
Wi-Fi Protected Setup Button Use Wi-Fi Protected Setup to automatically and
securely add wireless devices to your network. Refer to Using Wi-Fi Protected
Setup on page 7.
Ethernet (blue) Connect wired devices to your wireless network with
Ethernet (network) cables. The green light turns on when an Ethernet device
is connected and active on this port. The light blinks when the extender is
sending or receiving data over the Ethernet port.
Audio Port Connect the extender to your speaker.
Bottom
Reset Press and hold this button for about five seconds to reset the extender to
its factory defaults. You can also restore the defaults from the Administration >
Factory Defaults screen in the extenders browser- based utility.
How to install the range extender
Before setup, unplug or disconnect any range extenders on the network.
1. Connect the antennas and power cable as pictured. Antennas should be
upright for best results. Note: Your antennas might look different from those
pictured here.
2. Plug in the range extender midway between your router and the area
without Wi-Fi. Be sure you have at least 50% of your routers Wi-Fi signal at
that point on the device you will use for setup.
3. Wait for a solid light on the cover of the range extender. It could take up to
two minutes. On a computer, phone or tablet, connect to the Wi-Fi network
“Linksys Extender Setup.
• Windows 7 and Windows 8 will ask you, “Do you want to set up your
network?” Click the link, “Connect to network without setting it up.
4. If setup doesn’t start automatically, open a browser to http://192.168.1.1.
TIP
You can also connect the range extender by using Wi-Fi Protected Setup. For
more information, see “Using Wi-Fi Protected Setup” on page 7.
1.5A
12VDC
1.5A
12VDC
Range Extender
Reset button
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys RE6500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys RE6500 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Linksys RE6500

Linksys RE6500 User Manual - All languages - 352 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info