602205
4
Zoom out
Zoom in
Previous page
1/43
Next page
Chapter 1
Product Overview
1
Broadband Firewall Router with 4-Port Switch/VPN Endpoint
Chapter 1:
Product Overview
Thank you for choosing the Linksys by Cisco Broadband
Firewall Router with 4-Port Switch/VPN Endpoint. The
Router lets you access the Internet through its four
switched ports. You can also use the Router to share
resources such as computers, printers and files. A variety
of security features help to protect your data and your
privacy while online. Security features include a Stateful
Packet Inspection (SPI) firewall and NAT technology.
Configuring the Router is easy using the provided browser-
based utility.
Front Panel
Power (Green) The Power LED lights up and
will stay on while the Router is powered on.
It flashes when the Router goes through its
self-diagnostic mode during every boot-up or
upgrades its firmware.
DMZ (Green) This features lights up when DMZ
is enabled.
1-4 (Green) These numbered LEDs correspond
with the numbered ports on the Routers back
panel. These LEDs have a dual function. If the
LED is continuously lit, the Router is successfully
connected to a device through that port. A
flashing LED indicates network activity over
that port.
Internet (Green) The Internet LED lights up
when there is a connection made through the
Internet port. A flashing LED indicates network
activity over the Internet port.
Back Panel
Reset There are two ways to reset the Router to
its factory default settings. Use a straightened
paper clip or similar object to press and hold the
Reset button for approximately five seconds.
You can also restore the defaults from the
Administration > Factory Defaults screen of the
Routers web-based utility.
Internet The Internet port is where you will
connect your cable or DSL Internet connection.
1-4 These Ethernet ports (1, 2, 3, 4) connect
the Router to computers on your wired network
and other Ethernet network devices.
Power The Power port is where you will
connect the power adapter.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFSX41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFSX41 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info