715384

Liebherr SBSef 7242 Manual

4
Zoom out
Zoom in
Previous page
1/6
Next page
NOTICE
Risk of damage to the castor bases!
u
When aligning the appliance by the back adjustable feet, do
not use a cordless screwdriver, as this will either damage the
height adjustment mechanism or possibly loosen the
adjusting rod. Adjust the feet by hand.
You can adjust the front height-adjustable feet with the open-
ended spanner
Fig. 8 (11)
included in the supply package, and
the rear height-adjustable feet* with a Torx® 25 screwdriver.
u
Retract the centre height-adjustable feet
Fig. 4 (C)
so they
are not in contact with the floor.
u
Level the combination using the outer height-adjustable feet
Fig. 4 (B)
.
Fig. 9
Before fitting the cover strip
Fig. 9 (12)
, press the two bars
together along the whole length. That makes it easier to insert
the strip into the gap. Use a soft cloth to press the strip into
place to avoid making dents in the surface. Carefully press the
strip into the gap, keeping it straight, to achieve an optimal joint.
u
On the front, press the long cover strip
Fig. 9 (12)
into the
vertical gap. Make sure the strip sits on top of the joining
plate
Fig. 9 (5)
.
u
Peel the protective film off the cover strip.*
Fig. 10
u
On the top of the appliances, press the short strip
Fig. 10 (13)
into the gap. Make sure the front edge of the
strip is flush with the joining plate
Fig. 10 (3)
.
u
Clip the cover
Fig. 10 (14)
over the gap between the two
control panel covers. Make sure the side edges of the cover
are flush with the control panel covers. To enable this, the
cover is expandable.
Fig. 11
u
Fit the bottom cover
Fig. 11 (15)
from above onto the joining
plate
Fig. 11 (5)
and snap it in at the bottom.
u
Connect the combination to the mains according to the
manual.
Appliances with IceMakers:
u
Connect the appliance to the fixed water connection
according to the manual.
NOTICE
Risk of damage when moving the combined SBS appliance!
The combined SBS appliance is heavy once assembled. The
appliance may be dented by improper movement.
u
Observe the information given on moving the appliance (see
above).
u
Carefully slide the combination into the intended position.
u
If necessary, align the height with the height-adjustable feet.
u
Lower the centre height-adjustable feet
Fig. 4 (C)
until they
touch the floor.
u
Then support the door: Extend the height-adjustable feet
Fig. 4 (A)
at the turn hinge until they are resting on the floor,
then turn them further by 90°.
Side-by-side assembly
4 * Depending on model and options
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SBSef 7242 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SBSef 7242 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SBSef 7242

Liebherr SBSef 7242 User Manual - German - 13 pages

Liebherr SBSef 7242 Installation Guide - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info