715384

Liebherr SBSef 7242 Manual

3
Zoom out
Zoom in
Previous page
1/6
Next page
q
When moving the appliances, always take hold of them at
the outer front corners. On no account should you push with
your knee against the side walls or door.
q
The combined appliance is easiest to shift diagonally by
moving the left and right corner alternately.
Once the combined appliance is exactly in front of the aper-
ture, push it straight in.
q
If the combined appliance
has to be pulled out of the
aperture again, take hold of
it in the lower third area and
pull it straight forwards.
NOTICE
Risk of damage when moving the combined SBS appliance!
The combined SBS appliance is heavy once assembled. The
appliance may be dented by improper movement.
u
Observe the information given on moving the appliance (see
above).
u
Remove all protective film from the outside of the housing.
On the front of the appliance:
Fig. 4
u
If necessary, completely retract the height-adjustable feet
Fig. 4 (A)
at the front of both appliances so that they are not
touching the floor.
u
Place the caps
Fig. 4 (1)
onto the four front height-adjust-
able feet.
u
Push both appliances together up to approx. 10 mm apart so
that they stand flush at the front.
Fig. 5
u
Unclip and remove the covers
Fig. 5 (2)
.
The joining plate automatically aligns the height of the appli-
ances. If one appliance is slightly higher than the other, start
with that appliance.
u
Put the joining plate
Fig. 5 (3)
in place and fix it loosely to
one appliance with two screws
Fig. 5 (4)
.
u
Move the joining plate sideways so that the centre bar of the
plate lies on the side wall of the appliance. Tighten the
screws.
u
Now screw the joining plate to the other appliance. As you
do this, shift the appliances together or apart slightly as
necessary.
Fig. 6
u
If the appliance is fitted with the pre-mounted screw
Fig. 6 (7)
: Undo the screw.
The joining plate automatically aligns the depth of the appli-
ances. If one appliance is further forward than the other, start
with that appliance. Otherwise start with the appliance on the
left.
u
Fix the joining plate
Fig. 6 (5)
loosely to one appliance with
two screws
Fig. 6 (6)
.
u
Move the joining plate sideways so that the centre bar of the
plate lies on the side wall of the appliance. Tighten the
screws.
u
Now screw the joining plate to the other appliance. As you
do this, shift the appliances together or apart slightly as
necessary.
On the rear of the appliance:
Fig. 7
u
Insert the joining clamp
Fig. 7 (8)
at the top of the centre
side walls.
u
Insert the joining angle
Fig. 7 (9)
into the recess at the
bottom.
u
If the joining angle is too loose, fix it with a screw
Fig. 7 (10)
.
Note
u
To avoid vibration noise, ensure neither the clamps nor the
screws are in contact with the tubes on the rear of the appli-
ance!
On the front of the appliance:
Fig. 8
Side-by-side assembly
* Depending on model and options 3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SBSef 7242 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SBSef 7242 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SBSef 7242

Liebherr SBSef 7242 User Manual - German - 13 pages

Liebherr SBSef 7242 Installation Guide - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info