611590
4
Zoom out
Zoom in
Previous page
1/11
Next page
14
Operating and control elements
(1) On/O button, refrigerator compartment
(2) Alarm symbol
(3) SuperCool button
(4) SuperFrost button
(5) SuperFrost symbol
(6) On/O button, freezer compartment
(7) Holiday button
(8) Alarm button
(9) Down setting button, freezer compartment
(10) Freezer compartment temperature display
(11) Up setting button, freezer compartment
(12) Refrigerator compartment temperature display
(13) Down setting button, refrigerator compartment
(15) Up setting button, refrigerator compartment
(16) Child-proong symbol
(17) Power failure symbol
(18) Menu symbol > Setup mode is activated (activating the
child lock and adjusting the display brightness)
(19) Net@Home symbol
(20) SuperCool symbol
Setting up
Do not place the appliance in areas of direct sunlight or next to a
cooker, radiator or similar object.
The floor on which the appliance stands should be horizontal and
level. To compensate for any unevenness, adjust the height of the
feet with the open-ended spanner supplied.
Do not cover ventilation openings
or grille.
Do not place heat-emitting appliances, e.g.
microwave oven, toaster, etc., on top of the
appliance.
Standard EN 378 specifies that the room in
which you install your appliance must have a
volume of 1 m
3
per 8 g of R 600a refrigerant
used in the appliance, so as to avoid the forma-
tion of inflammable gas/air mixtures in the room
where the appliance is located in the event of
a leak in the refrigerant circuit. The quantity of
refrigerant used in your appliance is indicated
on the type plate on the inside of the appliance.
To ensure that the stated energy
consumption is achieved, the wall
spacers supplied with the appliance
must be used. This increases the
depth of the appliance by approx.
35 mm.
The appliance is fully operational even
if the spacers are not used. It does,
however, have a slightly higher energy
consumption.
Fit the spacers to the back of
the appliance on the left and
right at the top.
Electrical connection
Only operate the appliance with alternating current (AC).
The permissible voltage and frequency are indicated on the type
plate. The position of the type plate is shown in the section entitled
Description of the appliance.
The socket must be properly earthed and protected by a fuse.
The tripping current of the fuse must be between 10 A and 16 A.
The socket must not be situated behind the appli-
ance and must be easily accessible.
Do not connect the appliance using an exten-
sion cable or extension socket.
Do not use stand-alone inverters (conversion
of direct current to alternating current/three-
phase current) or energy-saving plugs. Risk
of damage to the electronic control system!
Dimensions (mm)
H = 1851 mm > CBN 4656
H = 2020 mm > CBN 5156
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNPes 4656 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNPes 4656 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNPes 4656

Liebherr CBNPes 4656 User Manual - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info